Sound core interval
Input Run length 1.00 m, core pieces 32 cm / 28 cm / 22 cm / 18 cm
Output RQD 100.0%, core recovery 100.0%, quality class Excellent
Interval-by-interval checks
Interval-by-interval checks
Supports decimal commas
Share URLs and local drafts
Kalkulator RQD / Recovery Inti
Review interval-by-interval core length, recovered length, RQD, core recovery, and core loss in one place.
Mendukung input interval from/to maupun panjang potongan inti langsung, dengan satuan dan jumlah desimal dikendalikan dari Pengaturan.
Contoh
Fractured interval
Input Run length 1.00 m, core pieces 18 cm / 14 cm / 9 cm / 8 cm / 7 cm / 6 cm / 5 cm / 4 cm
Output RQD 32.0%, core recovery 71.0%, quality class Poor, fracture zone flagged
Low-recovery long run
Input Run length 10 ft, core pieces 18 in / 12 in / 8 in
Output RQD 31.7%, core recovery 31.7%, loss flag shown
Pertanyaan yang sering diajukan
What is RQD?
RQD stands for Rock Quality Designation. It is the sum of core piece lengths longer than the cutoff, divided by the run length.
Can I enter from/to depths and run length at the same time?
Yes. If both are entered, the tool warns you when the run length and the from/to difference do not line up closely enough.
Can I mix units in the core piece list?
Yes. You can mix unit-tagged values. If a value has no unit, it is interpreted using the current piece unit.
Does it support decimal commas?
Yes. Inputs such as 1,25 are accepted.
Can RQD exceed 100%?
Normally no. If it does, check for unit mistakes or duplicated input.
Glosarium
RQD
The sum of core piece lengths longer than the cutoff, divided by the run length.
Core recovery
The total recovered core length divided by the run length.
Run length
The total length of the drill interval.
Core piece length
The length of each recovered core fragment.
Cutoff length
The minimum piece length counted toward RQD.
Formulas
map[Text:recovery = recovered_length / run_length × 100 text:recovery = recovered_length / run_length × 100]map[Text:rqd = sum(piece_length >= cutoff_length) / run_length × 100 text:rqd = sum(piece_length >= cutoff_length) / run_length × 100]map[Text:core_loss = max(run_length - recovered_length, 0) text:core_loss = max(run_length - recovered_length, 0)]map[Text:quality_class = RQD-based classification text:quality_class = RQD-based classification]map[Text:fracture_flag = RQD < threshold or quality class is Poor/Very poor text:fracture_flag = RQD < threshold or quality class is Poor/Very poor]map[Text:loss_flag = core recovery < threshold text:loss_flag = core recovery < threshold]
Catatan
- Alat ini adalah bantuan penyaringan, bukan pengganti interpretasi geologi atau perencanaan tambang.
- Jika Anda memasukkan kedalaman from/to dan panjang run, selalu periksa konsistensi satuan.
- Sesuaikan panjang cutoff dan ambang sesuai standar lokasi Anda.
- Jika hasil melebihi 100%, curigai kesalahan satuan atau input ganda.
Alat terkait
Pembersih CSV Lubang Bor
Validasi CSV collar, survey, assay, dan lithology lubang bor secara lokal di browser. Deteksi pembalikan kedalaman, overlap, koordinat yang hilang, dan kemungkinan kesalahan unit sebelum ekspor.
Pemeriksa Desain Bench Tambang Terbuka
bench / berm / angleCheck bench height, berm width, face angle, and overall slope angle in a 2D open pit section.
Dilution and Ore Loss Quick Calculator
Perkirakan dilusi dan kehilangan bijih dari lebar rencana, lebar yang ditambang, dan kesalahan pemisahan batas. Dibuat untuk pertambangan bawah tanah, perencanaan jangka pendek, dan pemeriksaan teknis cepat.