Sound core interval
Input Run length 1.00 m, core pieces 32 cm / 28 cm / 22 cm / 18 cm
Output RQD 100.0%, core recovery 100.0%, quality class Excellent
ການກວດແຕ່ລະຊ່ວງ
ການກວດແຕ່ລະຊ່ວງ
ຮອງຮັບ decimal comma
URL ແບ່ງປັນ ແລະ ບົດຮ່າງໃນອຸປະກອນ
RQD / ເຄື່ອງຄຳນວນການກູ້ຄືນແກນ
ກວດຄວາມຍາວແກນ, ຄວາມຍາວທີ່ກູ້ຄືນໄດ້, RQD, ການກູ້ຄືນແກນ, ແລະການສູນເສຍແກນໃນຈຸດດຽວ.
ມັນຮອງຮັບທັງການປ້ອນຊ່ວງຈາກ/ຮອດ ແລະການປ້ອນຄວາມຍາວຊິ້ນແກນໂດຍກົງ, ໂດຍຄວບຄຸມໜ່ວຍ ແລະຈຸດທົດສະນິຍົມຈາກການຕັ້ງຄ່າ.
ຕົວຢ່າງ
Fractured interval
Input Run length 1.00 m, core pieces 18 cm / 14 cm / 9 cm / 8 cm / 7 cm / 6 cm / 5 cm / 4 cm
Output RQD 32.0%, core recovery 71.0%, quality class Poor, fracture zone flagged
Low-recovery long run
Input Run length 10 ft, core pieces 18 in / 12 in / 8 in
Output RQD 31.7%, core recovery 31.7%, loss flag shown
Frequently asked questions
What is RQD?
RQD stands for Rock Quality Designation. It is the sum of core piece lengths longer than the cutoff, divided by the run length.
Can I enter from/to depths and run length at the same time?
Yes. If both are entered, the tool warns you when the run length and the from/to difference do not line up closely enough.
Can I mix units in the core piece list?
Yes. You can mix unit-tagged values. If a value has no unit, it is interpreted using the current piece unit.
Does it support decimal commas?
Yes. Inputs such as 1,25 are accepted.
Can RQD exceed 100%?
Normally no. If it does, check for unit mistakes or duplicated input.
ຄຳສັບ
RQD
The sum of core piece lengths longer than the cutoff, divided by the run length.
ອັດຕາກູ້ຄືນແກນ
The total recovered core length divided by the run length.
ຄວາມຍາວຊ່ວງ
The total length of the drill interval.
Core piece length
The length of each recovered core fragment.
Cutoff length
The minimum piece length counted toward RQD.
ສູດຄຳນວນ
map[Text:recovery = recovered_length / run_length × 100 text:recovery = recovered_length / run_length × 100]map[Text:rqd = sum(piece_length >= cutoff_length) / run_length × 100 text:rqd = sum(piece_length >= cutoff_length) / run_length × 100]map[Text:core_loss = max(run_length - recovered_length, 0) text:core_loss = max(run_length - recovered_length, 0)]map[Text:quality_class = RQD-based classification text:quality_class = RQD-based classification]map[Text:fracture_flag = RQD < threshold or quality class is Poor/Very poor text:fracture_flag = RQD < threshold or quality class is Poor/Very poor]map[Text:loss_flag = core recovery < threshold text:loss_flag = core recovery < threshold]
ໝາຍເຫດ
- This tool is a screening aid, not a replacement for geologic interpretation or mine planning.
- If you enter both from/to depths and run length, always check unit consistency.
- Tune the cutoff length and thresholds to your site standards.
- If a result exceeds 100%, suspect a unit mistake or duplicated input.
ເຄື່ອງມືທີ່ກ່ຽວຂ້ອງ
ເຄື່ອງລ້າງ CSV ຫຼຸມຂຸດ
ກວດສອບ CSV ຂອງ collar, survey, assay, ແລະ lithology ໃນບຣາວເຊີແບບທ້ອງຖິ່ນ. ຈັບການກັບທາງຄວາມເລິກ, ການຊ້ອນທັບ, ພິກັດທີ່ຂາດ, ແລະຄວາມຜິດພາດໜ່ວຍທີ່ອາດຈະເກີດ ກ່ອນສົ່ງອອກ.
ເຄື່ອງກວດອອກແບບ bench ຂຸດເປີດ
bench / berm / angleກວດຄວາມສູງ bench, ຄວາມກວ້າງ berm, ມຸມ face, ແລະມຸມລາດລວມໃນພາກຕັດ open pit ແບບ 2D.
ເຄື່ອງຄຳນວນດ່ວນການເຈືອຈາງ ແລະ ການສູນເສຍແຮ່
ປະເມີນການເຈືອຈາງ ແລະ ການສູນເສຍແຮ່ຈາກຄວາມກວ້າງຕາມແຜນ, ຄວາມກວ້າງທີ່ຂຸດໄດ້, ແລະຄວາມຄາດເຄື່ອນການແຍກຂອບເຂດ. ສ້າງມາສຳລັບການຂຸດຄົ້ນໃຕ້ດິນ, ການວາງແຜນໄລຍະສັ້ນ, ແລະການກວດສອບທາງວິຊາການດ່ວນ.