Sound core interval
Girdi Run length 1.00 m, core pieces 32 cm / 28 cm / 22 cm / 18 cm
Çıktı RQD 100.0%, core recovery 100.0%, quality class Excellent
Interval-by-interval checks
Interval-by-interval checks
Supports decimal commas
URL'leri ve yerel taslakları paylaşın
RQD / Core Recovery Hesaplayıcı
Review interval-by-interval core length, recovered length, RQD, core recovery, and core loss in one place.
Aralık giriş/çıkış girişi ve doğrudan çekirdek parça uzunluklarının her ikisini de destekler, birimler ve ondalık basamaklar Ayarlar'dan kontrol edilir.
Örnekler
Fractured interval
Girdi Run length 1.00 m, core pieces 18 cm / 14 cm / 9 cm / 8 cm / 7 cm / 6 cm / 5 cm / 4 cm
Çıktı RQD 32.0%, core recovery 71.0%, quality class Poor, fracture zone flagged
Low-recovery long run
Girdi Run length 10 ft, core pieces 18 in / 12 in / 8 in
Çıktı RQD 31.7%, core recovery 31.7%, loss flag shown
Frequently asked questions
What is RQD?
RQD stands for Rock Quality Designation. It is the sum of core piece lengths longer than the cutoff, divided by the run length.
Can I enter from/to depths and run length at the same time?
Yes. If both are entered, the tool warns you when the run length and the from/to difference do not line up closely enough.
Can I mix units in the core piece list?
Yes. You can mix unit-tagged values. If a value has no unit, it is interpreted using the current piece unit.
Does it support decimal commas?
Yes. Girdis such as 1,25 are accepted.
Can RQD exceed 100%?
Normally no. If it does, check for unit mistakes or duplicated girdi.
Glossary
RQD
The sum of core piece lengths longer than the cutoff, divided by the run length.
Core recovery
The total recovered core length divided by the run length.
Run length
The total length of the drill interval.
Core piece length
The length of each recovered core fragment.
Cutoff length
The minimum piece length counted toward RQD.
Formulas
map[Text:recovery = recovered_length / run_length × 100 text:recovery = recovered_length / run_length × 100]map[Text:rqd = sum(piece_length >= cutoff_length) / run_length × 100 text:rqd = sum(piece_length >= cutoff_length) / run_length × 100]map[Text:core_loss = max(run_length - recovered_length, 0) text:core_loss = max(run_length - recovered_length, 0)]map[Text:quality_class = RQD-based classification text:quality_class = RQD-based classification]map[Text:fracture_flag = RQD < threshold or quality class is Poor/Very poor text:fracture_flag = RQD < threshold or quality class is Poor/Very poor]map[Text:loss_flag = core recovery < threshold text:loss_flag = core recovery < threshold]
Notlar
- This tool is a ekraning aid, not a replacement for geokayıtic interpretation or mine planning.
- If you enter both from/to depths and run length, always check unit consistency.
- Tune the cutoff length and thresholds to your site standards.
- If a result exceeds 100%, suspect a unit mistake or duplicated girdi.
İlgili tools
Drill Hole CSV Cleaner
Delme yaka, anket, analiz ve litoloji CSV'lerini tarayıcıda yerel olarak doğrulayın. Dışa aktarmadan önce derinlik ters çevirmelerini, çakışmaları, eksik koordinatları ve olası birim hatalarını yakalayın.
Open Pit Bench Tasarım Denetleyici
bench / berm / angleCheck bench height, berm width, face angle, and overall slope angle in a 2D open pit section.
Seyreltme ve Cevher Kaybı Hızlı Hesaplayıcısı
Planlanan genişlik, kazılan genişlik ve sınır ayrım hatasından seyreltme ve cevher kaybını tahmin edin. Yeraltı madenciliği, kısa vadeli planlama ve hızlı teknik kontroller için üretilmiştir.