Sound core interval
Entrada Run length 1.00 m, core pieces 32 cm / 28 cm / 22 cm / 18 cm
Salida RQD 100.0%, core recovery 100.0%, quality class Excellent
Verificaciones intervalo a intervalo
Verificaciones intervalo a intervalo
Admite comas decimales
URLs compartidas y borradores locales
Calculadora de RQD y recuperación de testigo
Revisa en un solo lugar la longitud de testigo, la longitud recuperada, el RQD, la recuperación de testigo y la pérdida de testigo, intervalo por intervalo.
Admite tanto la entrada por intervalos inicial/final como las longitudes directas de los fragmentos, con unidades y decimales controlados desde Ajustes.
Ejemplos
Fractured interval
Entrada Run length 1.00 m, core pieces 18 cm / 14 cm / 9 cm / 8 cm / 7 cm / 6 cm / 5 cm / 4 cm
Salida RQD 32.0%, core recovery 71.0%, quality class Poor, fracture zone flagged
Low-recovery long run
Entrada Run length 10 ft, core pieces 18 in / 12 in / 8 in
Salida RQD 31.7%, core recovery 31.7%, loss flag shown
Preguntas frecuentes
What is RQD?
RQD stands for Rock Quality Designation. It is the sum of core piece lengths longer than the cutoff, divided by the run length.
Can I enter from/to depths and run length at the same time?
Yes. If both are entered, the tool warns you when the run length and the from/to difference do not line up closely enough.
Can I mix units in the core piece list?
Yes. You can mix unit-tagged values. If a value has no unit, it is interpreted using the current piece unit.
Does it support decimal commas?
Yes. Inputs such as 1,25 are accepted.
Can RQD exceed 100%?
Normally no. If it does, check for unit mistakes or duplicated input.
Glosario
RQD
The sum of core piece lengths longer than the cutoff, divided by the run length.
Core recovery
The total recovered core length divided by the run length.
Run length
The total length of the drill interval.
Core piece length
The length of each recovered core fragment.
Cutoff length
The minimum piece length counted toward RQD.
Fórmulas
map[Text:recovery = recovered_length / run_length × 100 text:recovery = recovered_length / run_length × 100]map[Text:rqd = sum(piece_length >= cutoff_length) / run_length × 100 text:rqd = sum(piece_length >= cutoff_length) / run_length × 100]map[Text:core_loss = max(run_length - recovered_length, 0) text:core_loss = max(run_length - recovered_length, 0)]map[Text:quality_class = RQD-based classification text:quality_class = RQD-based classification]map[Text:fracture_flag = RQD < threshold or quality class is Poor/Very poor text:fracture_flag = RQD < threshold or quality class is Poor/Very poor]map[Text:loss_flag = core recovery < threshold text:loss_flag = core recovery < threshold]
Notas
- This tool is a screening aid, not a replacement for geologic interpretation or mine planning.
- If you enter both from/to depths and run length, always check unit consistency.
- Tune the cutoff length and thresholds to your site standards.
- If a result exceeds 100%, suspect a unit mistake or duplicated input.
Herramientas relacionadas
Limpiador de CSV de sondeos
Valide localmente en el navegador los CSV de collar, survey, assay y litología. Detecte inversiones de profundidad, solapamientos, coordenadas faltantes y posibles errores de unidades antes de exportar.
Comprobador de diseño de bancos a cielo abierto
banco / berma / ánguloCompruebe la altura del banco, el ancho de la berma, el ángulo del frente y el ángulo global del talud en una sección 2D a cielo abierto.
Calculadora rápida de dilución y pérdida de mineral
Estime la dilución y la pérdida de mineral a partir del ancho planificado, el ancho excavado y el error de separación de límite. Diseñada para minería subterránea, planificación a corto plazo y comprobaciones técnicas rápidas.