Sound core interval
Input Run length 1.00 m, core pieces 32 cm / 28 cm / 22 cm / 18 cm
Output RQD 100.0%, core recovery 100.0%, quality class Excellent
Provjere po intervalu
Provjere po intervalu
Podržava decimalni zarez
URL dijeljenje i lokalne skice
Kalkulator RQD / oporavka jezgre
Pregledajte duljinu jezgre, vraćenu duljinu, RQD, oporavak jezgre i gubitak jezgre po intervalu na jednom mjestu.
Podržani su unos od/do dubina i izravni unosi duljina dijelova jezgre, uz jedinice i decimale iz postavki.
Primjeri
Fractured interval
Input Run length 1.00 m, core pieces 18 cm / 14 cm / 9 cm / 8 cm / 7 cm / 6 cm / 5 cm / 4 cm
Output RQD 32.0%, core recovery 71.0%, quality class Poor, fracture zone flagged
Low-recovery long run
Input Run length 10 ft, core pieces 18 in / 12 in / 8 in
Output RQD 31.7%, core recovery 31.7%, loss flag shown
Česta pitanja
What is RQD?
RQD stands for Rock Quality Designation. It is the sum of core piece lengths longer than the cutoff, divided by the run length.
Can I enter from/to depths and run length at the same time?
Yes. If both are entered, the tool warns you when the run length and the from/to difference do not line up closely enough.
Can I mix units in the core piece list?
Yes. You can mix unit-tagged values. If a value has no unit, it is interpreted using the current piece unit.
Does it support decimal commas?
Yes. Inputs such as 1,25 are accepted.
Can RQD exceed 100%?
Normally no. If it does, check for unit mistakes or duplicated input.
Pojmovnik
RQD
The sum of core piece lengths longer than the cutoff, divided by the run length.
Core recovery
The total recovered core length divided by the run length.
Run length
The total length of the drill interval.
Core piece length
The length of each recovered core fragment.
Cutoff length
The minimum piece length counted toward RQD.
Formule
map[Text:recovery = recovered_length / run_length × 100 text:recovery = recovered_length / run_length × 100]map[Text:rqd = sum(piece_length >= cutoff_length) / run_length × 100 text:rqd = sum(piece_length >= cutoff_length) / run_length × 100]map[Text:core_loss = max(run_length - recovered_length, 0) text:core_loss = max(run_length - recovered_length, 0)]map[Text:quality_class = RQD-based classification text:quality_class = RQD-based classification]map[Text:fracture_flag = RQD < threshold or quality class is Poor/Very poor text:fracture_flag = RQD < threshold or quality class is Poor/Very poor]map[Text:loss_flag = core recovery < threshold text:loss_flag = core recovery < threshold]
Napomene
- This tool is a screening aid, not a replacement for geologic interpretation or mine planning.
- If you enter both from/to depths and run length, always check unit consistency.
- Tune the cutoff length and thresholds to your site standards.
- If a result exceeds 100%, suspect a unit mistake or duplicated input.
Povezani alati
Čistač CSV-a bušotina
Lokalno u pregledniku provjeravajte CSV-ove collar, survey, assay i lithology podataka bušotina. Prije izvoza otkrijte obrte dubine, preklapanja, nedostajuće koordinate i vjerojatne pogreške jedinica.
Provjera dizajna terasa površinskog kopa
terasa / berm / kutProvjerite visinu terase, širinu berme, kut čela i ukupni kut nagiba u 2D presjeku površinskog kopa.
Brzi kalkulator razrjeđenja i gubitka rude
Procijenite razrjeđenje i gubitak rude iz planirane širine, iskopane širine i pogreške u podjeli granice. Izrađeno za podzemno rudarstvo, kratkoročno planiranje i brze tehničke provjere.