You can masshtab by factor or by maqsadli jami, then review before-correction, after-correction, and rounded values separately.
Paste-first kiritish flow
Factor and maqsadli-jami modes
CSV, JSON, and chop etish chiqish
Partiya masshtablash kalkulyatori (nisbatni saqlagan holda, yo'qotish va chiqim bilan)
Masshtab a formulatsiya without changing its ratios, then apply yo‘qotish, chiqim, and minimum dozalash rounding in one pass. Paste a spreadsheet jadval and go straight to a scaled partiya jadval, deltas, and CSV or JSON export.
Yuklash a shablon
Boshlash with a small namuna formula so the natija flow is visible immediately.
Paste from Excel or Sheets
Paste TSV or CSV data and split it into qatorlar automatically.
CSV import qilish
Ochish an existing partiya sheet or record file and recalculate it in place.
Yo‘qotish, chiqim, and minimum dozalash rounding are applied in one workflow, so you can reach a amaliy charging jadval faster.
The last working state and saqlangan snapshots stay in the brauzer on this device, so you can resume the same flow later.
Qanday foydalaniladi
- Paste a formula jadval or add qatorlar manually for komponent, amount, birlik, and izoh.
- Choose either factor mode or maqsadli-jami mode. The maqsadli jami always refers to the pre-correction jami.
- Add yo‘qotish, chiqim, and rounding only if needed, so the natija moves closer to a amaliy charging jadval.
- Review the summary and scaled partiya jadval, then export as TSV, CSV, JSON, or chop etish chiqish.
Masshtab a laboratoriya formula by 10
Kiritish: Water 100 g, NaCl 5 g, Citric Acid 1 g, factor 10
Natija: Water 1000 g, NaCl 50 g, Citric Acid 10 g
Match a maqsadli jami of 12.5 kg
Kiritish: original jami 1000 g, maqsadli jami 12.5 kg, yo‘qotish 2%, chiqim 98%, rounding 0.1 g
Natija: factor 12.5, scaled jami before correction 12500 g, after correction 13010.2 g, after rounding 13010.5 g
Formula with both massa and hajm
Kiritish: Resin 900 g, Additive 50 g, Erituvchi 120 mL, factor 4
Natija: factor mode scales each qator by 4. Maqsadli-jami mode warns unless one keng tarqalgan approximate zichlik is provided.
Masshtab koeffitsiyenti
The multiplier applied to the original formula. A factor of 10 multiplies every qator by 10.
Yo‘qotish rate
The extra allowance expected during charging or handling. It is added on top of the theoretical amount.
Chiqim
The fraction you expect to obtain at the end. It is used to back-hisoblash the amount that must be charged.
Formulalar
Pre-correction amount = original amount × scale factorCharge-basis corrected amount = pre-correction amount × (1 + loss / 100) ÷ (yield / 100)Product-basis corrected amount = pre-correction amount ÷ (1 + loss / 100) × (yield / 100)Target-total factor = target total ÷ original totalRounded amount = rounding method(target amount, minimum charge increment)
English
Masshtab a partiya while preserving formulatsiya ratios. Paste a spreadsheet jadval, adjust for yo‘qotish and chiqim, round to minimum charging increments, and export clean chiqish without sending data to a server.
FAQ
Can I mix g and kg, or mL and L?
Yes. Mixed entries within the same family, such as mg, g, kg or uL, mL, L, are normalized automatically. If massa and hajm are mixed together, maqsadli-jami mode needs one keng tarqalgan approximate zichlik.
Can I round to a charging increment?
Yes. Set a minimum dozalash increment and choose round up, nearest, or down. The vosita also shows the jami drift caused by rounding.
Is the kiritish saqlangan anywhere?
The last working state and saqlangan snapshots stay only in this brauzer on this device. Nothing is sent to the server.
Why do I get a ogohlantirish in maqsadli-jami mode?
When massa and hajm are mixed, the meaning of jami quantity is ambiguous. Unless you provide one keng tarqalgan approximate zichlik, factor mode is safer.
What is the asosli flow from laboratoriya partiya to production partiya?
First masshtab the formula while keeping the nisbat intact. Then apply yo‘qotish, chiqim, and rounding to settle on a amaliy dozalash amount. Equipment limits and process constraints should still be checked separately.
Izohlar
- This vosita is a formulatsiya scaling aid. It does not evaluate safety, reactivity, heat generation, viscosity change, mixing order, eruvchanlik, shear, or equipment capability.
- Before applying the natija to a real process, review equipment limits, process design, risk assessment, regulations, and sifat specifications separately.
- If you foydalanish one keng tarqalgan approximate zichlik for a mixed massa-hajm formula, treat the natija as an estimate rather than an exact physical aylantirish.