ਪੈਕਿੰਗ ਸਮੱਗਰੀ ਕੈਲਕੁਲੇਟਰ
ਬਕਸਿਆਂ ਦੀ ਗਿਣਤੀ ਅਤੇ ਇੱਕ ਬਕਸਾ ਆਕਾਰ ਤੋਂ ਕੁਝ ਸਕਿੰਟਾਂ ਵਿੱਚ ਕਾਰਟਨ, ਟੇਪ, ਅਤੇ ਕੁਸ਼ਨਿੰਗ ਦਾ ਅੰਦਾਜ਼ਾ ਲਗਾਓ।
ਮੈਟ੍ਰਿਕ ਜਾਂ ਇੰਪੀਰੀਅਲ ਇਕਾਈਆਂ ਵਿੱਚ ਕੰਮ ਕਰੋ, ਅਤੇ ਬਾਕਸ ਸ਼ੈਲੀ, ਸੀਲਿੰਗ ਪੈਟਰਨ, ਅਤੇ ਭਰਨ ਧਾਰਣਾਂ ਨੂੰ ਦਿਖਾਈ ਰੱਖੋ।
ਇਹ ਟੂਲ ਕੀ ਕਵਰ ਕਰਦਾ ਹੈ
ਕਿਵੇਂ ਵਰਤਣਾ ਹੈ
- ਦਰਜ ਕਰੋ the ਅੰਕ of ਬਕਸੇ and the ਬਕਸਾ length, width, and ਉਚਾਈ.
- ਸੈਟਿੰਗਾਂ ਖੋਲ੍ਹੋ if you need to change ਬਕਸਾ ਸ਼ੈਲੀ, ਸੀਲਿੰਗ ਪੈਟਰਨ, or ਕੁਸ਼ਨਿੰਗ profile.
- ਸਮੀਖਿਆ ਕਰੋ ਲੋੜੀਂਦਾ ਬਕਸੇ, ਕੋਰਗੇਟਿਡ ਖੇਤਰ, ਟੇਪ length, and ਕੁਸ਼ਨਿੰਗ ਆਇਤਨ.
- ਕਾਪੀ ਕਰੋ the ਨਤੀਜਾ or ਸਾਂਝਾ ਕਰੋ the exact setup by URL.
ਉਦਾਹਰਨਾਂ
ਮੈਟ੍ਰਿਕ standard ਪੈਕਿੰਗ
120 ਬਕਸੇ, 30 × 22 × 12 cm, ਬਕਸਾ ਸ਼ੈਲੀ RSC, ਸੀਲਿੰਗ ਪੈਟਰਨ H-ਸੀਲ, ਕੁਸ਼ਨਿੰਗ profile standard
ਬਕਸੇ ਲੋੜੀਂਦਾ 120, ਸਿਫ਼ਾਰਸ਼ੀ 123, ਕੋਰਗੇਟਿਡ ਖੇਤਰ 34.9 m², ਟੇਪ 257.1 m (6 ਰੋਲ at 50 m), ਕੁਸ਼ਨਿੰਗ 149.7 L (2 packs at 100 L)
ਇੰਪੀਰੀਅਲ ਇਨਪੁਟ for shared planning
250 ਬਕਸੇ, 16 × 12 × 10 in, ਬਕਸਾ ਸ਼ੈਲੀ RSC, ਸੀਲਿੰਗ ਪੈਟਰਨ H-ਸੀਲ, ਕੁਸ਼ਨਿੰਗ profile standard
ਸਿਫ਼ਾਰਸ਼ੀ 255, ਕੋਰਗੇਟਿਡ ਖੇਤਰ 1858.5 ft² (172.7 m²), ਟੇਪ 741.2 yd, ਕੁਸ਼ਨਿੰਗ 43.75 ft³
ਸ਼ਬਦਾਵਲੀ
RSC
Regular slotted ਕਾਰਟਨ, the common ਕੋਰਗੇਟਿਡ ਸ਼ਿਪਿੰਗ ਬਕਸਾ ਸ਼ੈਲੀ.
H-seal
A ਸੀਲਿੰਗ ਪੈਟਰਨ that tapes the center seam and ਦੋਵੇਂ side seams on top and bottom.
ਭਰਾਅ ratio
The ਸਾਂਝਾ ਕਰੋ of ਬਕਸਾ ਆਇਤਨ assumed to be filled with ਕੁਸ਼ਨਿੰਗ or void ਭਰਾਅ.
ਕੋਰਗੇਟਿਡ ਖੇਤਰ
Estimated ਬੋਰਡ usage derived from ਬਕਸਾ surface ਖੇਤਰ, ਸ਼ੈਲੀ factor, and waste allowance.
Formulas
Surface ਖੇਤਰ = 2 × (L×W + L×H + W×H)ਕੋਰਗੇਟਿਡ ਖੇਤਰ = Surface ਖੇਤਰ × ਬਕਸਾ ਸ਼ੈਲੀ factor × (1 + waste ਦਰ)ਟੇਪ length = (base ਸੀਲਿੰਗ run + strip count × overlap) × (1 + ਟੇਪ waste ਦਰ)ਕੁਸ਼ਨਿੰਗ ਆਇਤਨ = ਬਕਸਾ ਆਇਤਨ × ਭਰਾਅ ratio × (1 + ਕੁਸ਼ਨਿੰਗ waste ਦਰ)
ਅਕਸਰ ਪੁੱਛੇ ਸਵਾਲ
What does ਬਕਸਾ count mean here?
It is the ਅਸਲ ਅੰਕ of ਬਕਸੇ you will pack. If one shipment uses two ਬਕਸੇ, count that as 2.
Should I ਦਰਜ ਕਰੋ inner ਮਾਪ or outer ਮਾਪ?
This first version assumes finished outer ਮਾਪ as an approximation. If you only know inner ਮਾਪ, the ਬੋਰਡ ਅੰਦਾਜ਼ਾ ਲਗਾਓ is still usable, but ਕੁਸ਼ਨਿੰਗ can shift more.
Why is the ਕੁਸ਼ਨਿੰਗ amount only an ਅੰਦਾਜ਼ਾ ਲਗਾਓ?
Because the ਟੂਲ does not know the product shape, occupied ਆਇਤਨ, fragility, or insert design. Switch between compact, standard, fragile, or custom ਭਰਾਅ ਧਾਰਣਾਂ as needed.
Why can ਟੇਪ length differ from the ਗੋਦਾਮ floor?
Differences come from ਸੀਲਿੰਗ method, overlap, rework, dispenser ਸੰਭਾਲ, and ਸਥਾਨਕ practice. Adjust ਸੀਲਿੰਗ ਪੈਟਰਨ, overlap, and ਟੇਪ waste ਦਰ to match your operation.
Does this ਗਣਨਾ ਕਰੋ ਸਮੱਗਰੀ ਲਾਗਤ or ਭੇਜਾ too?
No. This page is intentionally limited to ਮਾਤਰਾ and usage estimates for ਪੈਕਿੰਗ materials.
Notice
- ਨਤੀਜੇ are estimates. ਬਕਸਾ construction, ਬੋਰਡ thickness, ਸੀਲਿੰਗ habits, occupied ਆਇਤਨ, and ਸੰਭਾਲ loss can change the ਅਸਲ numbers.
- The ਟੂਲ does not ਸ਼ਾਮਲ ਕਰੋ product ਮਾਪ, inserts, double-boxing, ਬੈਗ, stretch film, or ਲੇਬਲ stock.
- Confirm final purchasing quantities against ਗੋਦਾਮ ਇਤਿਹਾਸ or ਸਪਲਾਇਰ specs before ordering.