Mass balance first
Start with dry matter, then derive the target weight and water change from the moisture numbers.
Nem Giderme ve Hedef Ağırlık Hesaplayıcısı
Enter the current weight, current moisture, and target moisture to see how much water to remove and what weight to aim for after drying.
Islak bazlı kütle dengesi kullandığı için, odun, kömür hammaddesi ve biyokütle kurutma planları için hava durumu entegrasyonu olmadan bile pratiktir.
If the target moisture is higher than the current moisture, the tool switches to a water-addition result instead of drying.
Wet-basis girdi
kg, t, lb, US ton, long ton
Shareable URL
No weather model needed
Global units
Work in kg, t, lb, US ton, or long ton without changing the calculation itself.
Easy to paylaşım
Put the state in the URL so the same drying condition can be reopened on another device.
Browser only
Hesaplama bu tarayıcıda kaldığından sunucuya yükleme gerekmez.
How to use
- Enter the current weight and choose the unit used for that value.
- Enter the current moisture and target moisture as wet-basis percentages.
- Check the result cards for the water change, dry matter, and target weight.
- Aynı durumu başka bir yerde yeniden oluşturmak istiyorsanız paylaşım URL'sini kopyalayın.
Examples
These sample cases cover both firewood and charcoal feedstock.
Firewood batch
8.0 t / current moisture 50% / target moisture 20%
Water to remove 3.0 t. Target weight after drying 5.0 t. Dry matter 4.0 t.
Charcoal feedstock batch
2,000 lb / current moisture 50% / target moisture 25%
Water to remove 666.7 lb. Target weight after drying 1,333.3 lb. Dry matter 1,000.0 lb.
Glossary
- Wet basis
- Nem, mevcut toplam ağırlığın bir payı olarak ifade edilir.
- Dry matter
- The solid part that remains after water is removed.
- Current water
- The water contained in the material right now.
- Target weight
- The total weight you want to reach after drying.
- Mass balance
- A way of thinking about the in-and-out balance of mass.
Formulas
Hesaplayıcı yalnızca kütle dengesini kullanır. Hava durumu modeli, kuruma eğrisi veya süre tahmini söz konusu değildir.
-
Dry matter = current weight × (1 - current moisture)
-
Target weight = dry matter ÷ (1 - target moisture)
-
Water to remove = current weight - target weight
-
Current water = current weight - dry matter
-
Target water = target weight - dry matter
SSS
What does wet-basis moisture mean?
Toplam ağırlığın içindeki su payıdır. Nem oranı 50% ise, mevcut ağırlığın yarısı sudur.
Why cannot the target moisture be 100%?
At 100%, the relationship with dry matter becomes undefined, so the target weight cannot be determined.
Can I use lb or tons?
Evet. Hesaplayıcı kg, t, lb, ABD tonu ve uzun ton destekler.
What if the target moisture is higher than the current moisture?
That means water must be added rather than removed, so the tool shows an add-water result.
Does this tahmin drying time too?
Hayır. Yalnızca kütle dengesini işler ve kuruma süresini tahmin etmez.
Notlar
- This tool does not tahmin drying time, weather effects, shrinkage, cracking, or combustion efficiency.
- Target moisture must be below 100%. A target of 100% is not calculable.
- If the target moisture is higher than the current moisture, the result switches to water addition.
- If the current moisture is 100%, the dry matter becomes zero. Check the measurement carefully.