Scaffolding Area Estimate (Perimeter × Height) | Accessory Areas
Тоҷикӣ
English 日本語 ລາວ Монгол Oʻzbekcha Тоҷикӣ Кыргызча Қазақша Azərbaycan Հայերեն ქართული العربية Български বাংলা čeština Dansk Deutsch Ελληνικά Español Eesti Suomi Français हिन्दी ગુજરાતી ಕನ್ನಡ मराठी മലയാളം Srpski Slovenčina Slovenščina Kiswahili Hrvatski Magyar Indonesia Italiano 한국어 Lietuvių Latviešu Nederlands Norsk Svenska Polski Português Română Русский Українська Беларуская Shqip اردو தமிழ் తెలుగు Türkçe ภาษาไทย Tiếng Việt 简体中文 繁體中文 עברית ខ្មែរ Melayu မြန်မာ ਪੰਜਾਬੀ සිංහල Tagalog नेपाली فارسی
Scaffolding Area

Scaffolding Area Estimate (Perimeter × Height → Area / Accessory Allowance)

For estimating only. Not for structural or safety planning.

Safety requirements come first
  • This tool is an estimate and does not replace scaffolding design, strength checks, or safety planning.
  • Actual work must follow site conditions, laws, specifications, and contractor standards.

Маълумот

Estimate in about a minute without drawings

3ステップ

Step 1: Enter perimeter

Perimeter = building outer perimeter
м

Enter from drawings or site measurements (perimeter = outer length)

Step 2: Height and coverage

Also shows covered perimeter
м

Work height for scaffolding (not building height).

Coverage rate is the share of perimeter that needs scaffolding.
Covered perimeter = Perimeter × Coverage rate 0 м

Step 3: Accessories (optional)

Ensure area coverage

Хулоса

Updates as you type

Scaffolding area (estimate)

0.0 м²
Perimeter0.0 м
Баландӣ0.0 м
Coverage rate0.00 (0.0 м)

Mesh sheet (estimate)

0.0 м²
Base A0.0 м²
Талафот0%

Protection (estimate)

0.0 м²
Base A0.0 м²
Талафот0%

Тафсилот (аслӣ → яклухтшуда)

Унсур Аслӣ Яклухтшуда
算出方式
Scaffolding area: A = perimeter × height × coverage rate
Accessory area: A × (1 + loss rate)
Display is rounded to 1 decimal place.
Reference materials
Quantities vary significantly by standards, methods, and contractors. Use as reference.

Mesh sheet conversion (optional)

%
м
м
Effective area = width × height × (1 - overlap) / Sheets needed = accessory area ÷ effective area
Арзёбӣ 0 sheets
Common mismatch factors
  • Missing perimeter from recesses/steps
  • Added roof or eave projections
  • Different ground or footing conditions
  • Contractor standard differences
Share this result
Save conditions in the URL to share.

Эзоҳ

  • This is an estimate. Actual scaffolding plans and quantities vary by building shape (recesses/steps/roofs/overhangs), ground conditions, nearby obstacles, laws/guidelines, contractor standards, and material specs.
  • Safety requirements are the highest priority. This tool is not for scaffolding design, strength checks, or safety planning.
  • Actual work must be performed under qualified supervision and contractor judgment.
  • Ин асбоб танҳо ёрии ҳисоббарорӣ буда, ивазкунандаи лоиҳакашӣ, қоидаҳо, шартномаҳо ё талаботи бехатарӣ нест.
  • Қиматҳои пресетҳо мисолҳо мебошанд ва вобаста ба шароит метавонанд тағйир ёбанд.
Scaffolding area (estimate)
0.0 м²