Calculate cycle time from load time, haul distance, speed, and wait time, then compare theoretical and actual productivity instantly.
Use fleet size sensitivity, operating rate comparisons, and bottleneck labels on the same screen.
The loading, travel, and wait pieces are shown as one truck cycle.
See whether the truck side or the shovel side is limiting, along with the recommended truck count.
60 t payload, 3:00 load time, 4.0 km one-way haul, 25 km/h, 1:00 wait time, 6 trucks, 1 shovel, 85% operating rate
cycle time about 23.2 min, theoretical about 973 t/h, actual about 791 t/h, truck-limited, recommended about 8 trucks/shovel
80 st payload, 3:00 load time, 2.5 mi one-way haul, 18 mph, 1:30 wait time, 5 trucks, 1 shovel, 80% operating rate
cycle time about 21.2 min, theoretical about 1,220 st/h, actual about 907 st/h, truck-limited
60 t payload, loaded 4.0 km at 22 km/h, return 4.0 km at 32 km/h, 3:00 load time, 1:00 wait time, 8 trucks, 1 shovel, 90% operating rate
cycle time about 22.4 min, theoretical about 1,200 t/h, actual about 1,080 t/h, shovel-limited
In simple mode, enter one-way distance and the tool doubles it internally. Detailed mode lets you enter loaded and return legs separately.
Theoretical productivity assumes no wait time and 100% operating rate. Actual productivity reflects wait time and operating rate.
Actual productivity changes linearly. The comparison table shows the difference from 50% to 100%.
Жоқ. Бұл енгізілген орташа күту уақытын бекітіп сақтайтын статикалық өнімділікті салыстыру құралы болып табылады. Ол кезек өсімін автоматты түрде бағаламайды.
Иә. Өндірістік алаңда нақты қолданатын бірлікті таңдаңыз. Құрал тығыздық бойынша түрлендірмейді, сондықтан негізгі бірлікті тікелей енгізіңіз.
Иә. Бет ағылшын тілінен аударылған, алайда URL бөлісу функциясы дәл сол күйді қайта жаңғыртады.
Time for one truck to complete a full loading, haul, return, and wait cycle.
Average load carried per truck cycle.
Өндіріс үшін нақты пайдаланылған жоспарлы уақыттың үлесі.
The resource or step that most strongly limits output.
Indicates the balance between truck-side and shovel-side capacity. Values near 1 are more balanced.
Average waiting time including queue, dump, spotting, and short delays.
map[Text:travelTimeSimple = 2 × haulDistance / haulSpeed × 60 text:travelTimeSimple = 2 × haulDistance / haulSpeed × 60]map[Text:travelTimeDetailed = loadedHaulDistance / loadedHaulSpeed × 60 + returnHaulDistance / returnHaulSpeed × 60 text:travelTimeDetailed = loadedHaulDistance / loadedHaulSpeed × 60 + returnHaulDistance / returnHaulSpeed × 60]map[Text:idealCycleTime = loadTime + travelTime text:idealCycleTime = loadTime + travelTime]map[Text:actualCycleTime = idealCycleTime + waitTime text:actualCycleTime = idealCycleTime + waitTime]map[Text:theoreticalTruckRate = payload / idealCycleTime × 60 text:theoreticalTruckRate = payload / idealCycleTime × 60]map[Text:actualTruckRate = payload / actualCycleTime × 60 text:actualTruckRate = payload / actualCycleTime × 60]map[Text:shovelRate = payload / loadTime × 60 text:shovelRate = payload / loadTime × 60]map[Text:actualFleetRate = min(truckCount × actualTruckRate, shovelCount × shovelRate) × operatingRate text:actualFleetRate = min(truckCount × actualTruckRate, shovelCount × shovelRate) × operatingRate]map[Text:recommendedTruckCount = ceil((shovelCount × shovelRate) / actualTruckRate) text:recommendedTruckCount = ceil((shovelCount × shovelRate) / actualTruckRate)]