Prvo bilanca mase
Start with dry matter, then derive the target weight and water change from the moisture numbers.
Kalkulator uklanjanja vlage i ciljne mase
Unesite trenutnu masu, trenutnu vlagu i ciljanu vlagu kako biste vidjeli koliko vode treba ukloniti i koju masu ciljati nakon sušenja.
Budući da koristi bilancu mase na mokroj osnovi, praktičan je i bez integracije vremena za ogrjev, sirovinu za drveni ugljen i planove sušenja biomase.
Ako je ciljna vlaga viša od trenutne, alat će prikazati dodavanje vode umjesto sušenja.
Unos na mokroj osnovi
kg, t, lb, američka tona, duga tona
URL za dijeljenje
Nije potreban model vremena
Globalne jedinice
Work in kg, t, lb, US ton, or long ton without changing the calculation itself.
Jednostavno dijeljenje
Put the state in the URL so the same drying condition can be reopened on another device.
Samo u pregledniku
The calculation stays inside this browser, so no server upload is needed.
Kako koristiti
- Enter the current weight and choose the unit used for that value.
- Enter the current moisture and target moisture as wet-basis percentages.
- Check the result cards for the water change, dry matter, and target weight.
- Copy the share URL if you want to reproduce the same condition elsewhere.
Primjeri
These sample cases cover both firewood and charcoal feedstock.
Firewood batch
8.0 t / current moisture 50% / target moisture 20%
Water to remove 3.0 t. Target weight after drying 5.0 t. Dry matter 4.0 t.
Charcoal feedstock batch
2,000 lb / current moisture 50% / target moisture 25%
Water to remove 666.7 lb. Target weight after drying 1,333.3 lb. Dry matter 1,000.0 lb.
Pojmovnik
- Wet basis
- Moisture expressed as a share of the total current weight.
- Dry matter
- The solid part that remains after water is removed.
- Current water
- The water contained in the material right now.
- Target weight
- The total weight you want to reach after drying.
- Mass balance
- A way of thinking about the in-and-out balance of mass.
Formule
Kalkulator koristi samo bilancu mase. Bez modela vremena, sušenja ni vremenske procjene.
-
Dry matter = current weight × (1 - current moisture)
-
Target weight = dry matter ÷ (1 - target moisture)
-
Water to remove = current weight - target weight
-
Current water = current weight - dry matter
-
Target water = target weight - dry matter
Česta pitanja
What does wet-basis moisture mean?
It is the water share of the total weight. If the moisture is 50%, half of the current weight is water.
Why cannot the target moisture be 100%?
At 100%, the relationship with dry matter becomes undefined, so the target weight cannot be determined.
Can I use lb or tons?
Yes. The calculator supports kg, t, lb, US ton, and long ton.
What if the target moisture is higher than the current moisture?
That means water must be added rather than removed, so the tool shows an add-water result.
Does this estimate drying time too?
No. It only handles mass balance and does not estimate drying time.
Napomene
- This tool does not estimate drying time, weather effects, shrinkage, cracking, or combustion efficiency.
- Target moisture must be below 100%. A target of 100% is not calculable.
- If the target moisture is higher than the current moisture, the result switches to water addition.
- If the current moisture is 100%, the dry matter becomes zero. Check the measurement carefully.