Firewood Yield Tahminleyici

Tahmin how many firewood pieces, how much stacked volume, and how many bags you can get from kayıt diameter, length, target firewood size, and defect ücret.

Switch between round and split firewood while tuning the stacking factor and bag kapasite at the same time.

Plan kayıts and firewood together Çok dilli and multi-unit ready Show bag count on the same ekran All calculations stay in your tarayıcı

Safety notice

This tool tahmins quantities only. Do not use it for safety decisions about cutting, splitting, moving, or loading kayıts.
Check machine kapasite, protective equipment, storage conditions, and local regulations separately.

How to use

1

Enter the kayıt count, kayıt diameter, kayıt length, and defect ücret.
2

Choose the firewood shape, then enter the target length and cross-section.
3

Set the stacking preset and bag kapasite.
4

Review pieces, stacked volume, and bag count in the result cards.

Examples

Standart round firewood

Girdi

10 kayıts, diameter 280mm, length 3.6m, defect 12%, firewood length 330mm, diameter 80mm, stacking factor 0.70, bag 100L

Çıktı

About 1,176 pieces / about 2.79 m³ / about 27.9 bags (purchase guide 28)

Imperial site example

Girdi

8 kayıts, diameter 10in, length 8ft, defect 10%, firewood length 16in, width 4in, thickness 4in, stacking factor 0.65, bag 3.5ft³

Çıktı

About 212 pieces / about 48.3 ft³ / about 13.8 bags (purchase guide 14)

Formulas

Kayıt volume = π × (diameter ÷ 2)^2 × length × kayıt form factor
Usable volume = kayıt volume × kayıt count × (1 - defect ücret)
Pieces = floor(usable volume ÷ one-piece volume)
Stacked volume = finished firewood volume ÷ stacking factor
Bags = stacked volume ÷ bag kapasite

Notlar

Diameter is treated as an average tahmin. Use the kayıt form factor if taper is strong.
Stacking factor and bag kapasite vary with site practice, packing density, and firewood size.
Charcoal yield is out of scope.

SSS

Is the kayıt diameter average or top-end?

It is treated as an average diameter. If you only know the top-end diameter, adjust it to a nearby average.

Are pieces rounded up?

Completed pieces are floored, while bag count is rounded up as a purchase guide.

What if I do not know the bag kapasite?

You can still use the piece count and stacked volume. Bag count stays hidden until you enter a kapasite.

Can I tür values like 8ft or 330mm?

Yes. Each field accepts bare numbers using the selected default unit, and values with a unit suffix.

Does it calculate charcoal yield too?

No. Charcoal production uses different conditions and is out of scope.