Field tahmin / ormancılık

Orman Biyokütlesi ve Karbon Tahmin Aracı

Tarayıcı tabanlı bir iş akışında göğüs çapı (DBH), ağaç yüksekliği, odun yoğunluğu ve tür grubundan yer üstü biyokütlesini, karbonu ve CO2e'yi tahmin edin.

Yerleşik referans denklemleriyle başlayın, kendi katsayı kümelerinizi kaydedin ve saha verileri eksik olduğunda yalnızca DBH tahminlerine geri dönün.

Built-in equations plus one custom preset you can save
Switch to DBH + density or DBH-only fallback when height is missing
Optional BGB with root/shoot ratio defaults
URL ile paylaşma ve JSON veya CSV dışa aktarma
Reference values only. Not for formal carbon reporting.

How to use

  1. Tahmin modunu, tür grubunu ve bir ön ayarı seçin, ardından yerleşik değerlerin yerel iş akışınıza uyup uymadığını onaylayın.
  2. Enter DBH first, then add tree height and wood density when the selected mode needs them.
  3. Turn on root biomass if you want BGB, and switch the carbon fraction between preset, species-specific, or custom values as needed.
  4. Sonucu gözden geçirin, ardından kopyalayın, URL'yi paylaşın veya daha sonra tekrar kullanmak üzere JSON ve CSV'yi dışa aktarın.

Examples

Height-based single tree
Girdi
DBH 35 cm / height 18 m / wood density 0.62 g/cm3 / height-based preset
Çıktı
AGB ≈ 732.08 kg, carbon ≈ 344.08 kg C, CO2e ≈ 1,261.61 kg
DBH + density fallback
Girdi
DBH 35 cm / wood density 0.62 g/cm3 / DBH + density preset
Çıktı
AGB ≈ 228.71 kg, carbon ≈ 107.49 kg C, CO2e ≈ 394.14 kg
Plot sample
Girdi
Three trees: 24 cm / 14 m / 0.58, 26 cm / 15 m / 0.59, 28 cm / 16 m / 0.60, plot area 0.05 ha
Çıktı
Total AGB ≈ 992.62 kg, carbon ≈ 466.53 kg C, CO2e ≈ 1,710.62 kg, or 19.85 t/ha

Formulas

All inputs are normalized to cm, m, g/cm3, kg, and t before the selected equation runs.

  • AGB = a × (rho × D^2 × H)^b
  • AGB = a × rho^c × D^b
  • AGB = a × D^b
  • BGB = AGB × root/shoot ratio
  • Carbon = total biomass × carbon fraction
  • CO2e = carbon × 44 / 12

Glossary

DBH

Diameter at breast height, measured at breast height or your local standart.

AGB

Above-ground biomass. This page reports it as the main biomass result.

BGB

Below-ground biomass. It is optional and uses a root/shoot ratio when enabled.

Wood density

Basic wood density or specific gravity used to tune the model.

Carbon fraction

Biyokütlenin karbon olduğu varsayılan payı. Bu araçta varsayılan değer 0,47'dir.

Root/shoot ratio

Kök biyokütlesi açık olduğunda BGB'yi AGB'den tahmin etmek için kullanılan bir çarpan.

CO2e

Carbon dioxide equivalent. Carbon is multiplied by 44/12 to convert to CO2e.

Frequently asked questions

Can I use this for formal carbon reporting?

Hayır. Bu sayfa saha tahminleri ve hızlı planlama için tasarlanmıştır, sertifikalı raporlama veya denetim işleri için değildir.

What if tree height is missing?

Switch to the DBH + density or DBH-only preset. The page keeps the calculation moving when height is not available.

Can I tür decimal commas?

Evet. Sayfa, ondalık virgül ve ondalık noktalarının yanı sıra basit birim soneklerini de kabul eder.

Can I save my own coefficients?

Yes. Save a custom preset in this tarayıcı, then export it as JSON if you want a portable copy.

Sayfa verilerimi bir sunucuya gönderiyor mu?

Hayır. Girişler, ön ayarlar ve sonuçlar, açıkça kopyalamadığınız veya paylaşmadığınız sürece tarayıcıda kalır.

Important notlar

  • Built-in equations are reference values only. Replace them with approved local coefficients when you have them.
  • Wood density, carbon fraction, and root/shoot ratio can vary by species, site, and data source.
  • Root biomass is optional. Leave it off if you only need AGB.
  • Per-hectare values depend on the plot area you enter. The page does not infer stand area for you.
  • Avoid putting private stand names into paylaşım URLs if they should not be public.