Pack-based
Start from EPA / EU-EEA / Custom, then expand the registry later.
VOC Regional Compliance Denetleyici for Architectural Coatings
Enter the country or region, coating category, VOC value, and basis to check the regulation that applies to the market.
EPA architectural coatings and EU/EEA decorative paints are bundled as the initial packs for a fast architectural coatings review.
Region pack
Category
VOC
Limit
Sources
Key puan
Built for fast first-pass checks before quotes, specs, and export work.
Basis-aware
If the VOC basis does not match, the tool falls back to review instead of guessing.
Copy-ready
Sonuçları kopyalayın veya teklifler, devirler ve özellik kontrolleri için mevcut URL'yi paylaşın.
How to use
Use the panel below to move from market selection to a regulation check in one pass.
- 1. Choose a country or region pack.
- 2. Choose a coating category and add 60° gloss or product form if needed.
- 3. Enter the VOC value and basis such as ready-to-use or thinned-to-max-recommendation.
- 4. Durumu, limiti, marjı ve etiket notlarını gözden geçirin.
- 5. Gerekirse sonucu kopyalayın veya mevcut URL'yi paylaşın.
Örnekler
EPA architectural coating quick check
Girdi
Country/region = United States (EPA), category = Flat coatings, VOC = 180 g/L, basis = thinned to max recommendation, product form = liquid
Çıktı
Durum = büyük olasılıkla uyumlu, limit = 250 g/L, marj = +70 g/L, not = suyu, muaf bileşikleri ve boya bazı renklendiricisini hariç tuttuktan sonra karşılaştırın
EU/EEA decorative paint quick check
Girdi
Country/region = EU/EEA (Decopaint), category = Interior matt walls and ceilings (WB), VOC = 42 g/L, basis = ready-to-use, 60° gloss = 12, product form = liquid
Çıktı
Durum = büyük olasılıkla limitin üzerinde, limit = 30 g/L, marj = -12 g/L, not = alt kategoriyi ve etikette kullanıma hazır g/L'yi onaylayın
Custom / other region quick check
Girdi
Country/region = Custom / other region, category = Custom / special case, VOC = 45 g/L, basis = ready-to-use, custom limit = 50 g/L
Çıktı
Durum = büyük olasılıkla uyumlu, limit = 50 g/L, marj = +5 g/L, not = özel notu girildiği gibi göster
Notlar
- This tool is for preliminary checks only. Final compliance must follow the destination market's law, local rules, product labels, SDS, and the latest manufacturer specifications.
- EPA and EU use different VOC bases. If the basis does not match, the tool falls back to review instead of guessing.
- Aerosols and specialty industrial coatings may be out of scope for the architectural packs.
- The pack registry is versioned so legal updates can bump the version and trigger review.
Glossary
VOC
Volatile organic compounds. Regulations often use a g/L limit.
ready-to-use
Value in the use-ready condition, including the required additions.
thinned-to-max-recommendation
Value after the manufacturer's maximum recommended thinning.
WB / SB
WB means waterborne and SB means solventborne.
subcategory
The product subcategory shown on EU labels.
overlay
Add-on rules from a state or province.
manual review
A state where the tool does not make a definitive machine decision because data is missing or the basis does not match.
Kayıtic
normalizedVOC = convert(vocValue, vocUnit -> packUnit)margin = limit - normalizedVOCusageRatio = normalizedVOC / limitpass = normalizedVOC <= limitwarn = pass and usageRatio >= warningThresholdreview = missing required data / basis mismatch / unresolved category
SSS
EPA ve AB neden aynı VOC değeri için farklı sonuçlar veriyor?
The bases differ. EPA uses thinned-to-max-recommendation, while EU uses ready-to-use.
Why is 60° gloss needed?
It helps split EU matt vs glossy categories and the EPA flat/nonflat fallback.
Can aerosols be checked?
They are out of scope for the architectural packs. Use a custom pack or another pack if needed.
What if my market is not listed yet?
İlk geçiş kontrolü için Özel / diğer bölgeyi kullanın ve daha sonra resmi bir paket ekleyin.
Is this legal advice?
No. It is a preliminary check helper only. Final confirmation should follow the local law and product label.