Young
High halumigmig, gentle airflow
Panatilihin conditions stable at avoid direct drafts.
26.0–28.0 °C / 85–90%
Suriin target temperatura, halumigmig, at bentilasyon notes fo each silkwom yugsa
Lumipat between young, mature, at mounting yugsas one screen at a time at highlight lamang ang deviation mula actual readings.
Actual readings can be ilagayed manually o i-impoted mula a lokal CSV. Nothing is sent sa a server.
Isang yugto bawat screen
Lokal na CSV import
Paglipat ng °C / °F
Why one yugsa per screen
Young at mounting yugsas need very iba-iba conditions, so panatilihining each yugsa separate reduces mistakes.
Mature
Balanced heat at airflow
Prevent heat buildup while panatilihining ang room even.
24.0–26.0 °C / 75–80%
Mounting
Dry, calm, at steady
Panatilihin ang room calm at ang air dry enough fo mounting.
23.0–25.0 °C / 60–70%
Yugsa targets at a glance
Gamitin angse default targets as a starting point, angn ihambing live readings inside ang dialog.
Young
High halumigmig, gentle airflow
Young larval yugsa
Panatilihin conditions stable at avoid direct drafts.
- Temperatura
- 26.0–28.0 °C
- Halumigmig
- 85–90%
Bentilasyon
Gentle, stable airflow. Avoid direct draft.
Mature
Balanced heat at airflow
Mature larval yugsa
Prevent heat buildup while panatilihining ang room even.
- Temperatura
- 24.0–26.0 °C
- Halumigmig
- 75–80%
Bentilasyon
Moderate bentilasyon. Prevent heat buildup.
Mounting
Dry, calm, at steady
Mounting yugsa
Panatilihin ang room calm at ang air dry enough fo mounting.
- Temperatura
- 23.0–25.0 °C
- Halumigmig
- 60–70%
Bentilasyon
Dry, even bentilasyon. Panatilihin ang room calm.
Paano Gamitin
- Piliin a yugsa at, if needed, change ang temperatura unit.
- Adlamang ang target temperatura, halumigmig, at bentilasyon note if your room gamitins a iba-iba lokal statard.
- Ilagay actual temperatura, halumigmig, bentilasyon status, o i-impot a lokal CSV.
- Suriin ang deviation strip at gamitin kopya, CSV i-expot, o i-print when you need sa ibahagi ang board.
Mga Halimbawa
Young yugsa example
Input: Target 26.0–28.0 °C / 85–90%, actual 27.4 °C / 88%, bentilasyon status aligned
Resulta: Temperatura at halumigmig stay within target, so ang board ipakitas a quiet OK state.
Mounting yugsa example
Input: Target 23.0–25.0 °C / 60–70%, actual 25.8 °C / 58%, bentilasyon status suriin
Resulta: Temperatura is above ang upper limit, halumigmig is below ang lower limit, at bentilasyon is marked fo suriin.
Talasalitaan
- Young larval yugsa
- Ang early feeding yugsa. In this saol it is hatled as one separate screen.
- Mature larval yugsa
- Ang later feeding yugsa. It usually needs a iba-iba balance of heat at airflow.
- Mounting yugsa
- Ang yugsa befoe cocooning, when ang room should stay calm at dry enough fo mounting.
- Bentilasyon note
- A shot note fo airflow instructions o cautions that are hard sa turn insa numbers.
- Deviation
- Any difference mula ang target range. Temperatura at halumigmig gamitin numbers, while bentilasyon gamitins a status.
Frequently asked questions
Can I save iba-iba target values fo each yugsa?
Yes. Temperatura, halumigmig, at bentilasyon notes are ssaed separately fo each yugsa.
What CSV fomat can I i-impot?
It i-impots CSV files that include a yugsa key at actual readings. Common English at lokal aliases are recognized ausamatically.
Can I lumipat temperatura units?
Yes. You can lumipat between °C at °F.
Do I need an internet connection?
No. Input, CSV parsing, at deviation display all happen in ang browser.
Mahahalagang Paalala
- Target values vary by region at operation, so treat ang defaults as halimbawas.
- Suriin ang temperatura unit befoe i-impoting CSV rows.
- Panatilihin actual readings at bentilasyon notes out of ang URL. Gamitin CSV o i-print instead.
- Gamitin CSV i-expot o i-print when you want sa move ang board sa anoangr device.