Dilution and Ore Loss Quick Calculator Mining Tools
Quick ਜਾਂਚ ਕਰੋ
ਪੰਜਾਬੀ
English 日本語 ລາວ Монгол Oʻzbekcha Тоҷикӣ Кыргызча Қазақша Azərbaycan Հայերեն ქართული العربية Български Dansk Deutsch Ελληνικά Español Eesti Suomi Français हिन्दी ગુજરાતી ಕನ್ನಡ मराठी മലയാളം Srpski Slovenčina Slovenščina Kiswahili Hrvatski Indonesia Italiano 한국어 Lietuvių Latviešu Nederlands Norsk Svenska Polski Português Română Русский Українська Беларуская Shqip اردو தமிழ் తెలుగు Türkçe ภาษาไทย Tiếng Việt 简体中文 繁體中文 עברית ខ្មែរ Melayu မြန်မာ ਪੰਜਾਬੀ සිංහල Tagalog is

Dilution and Ore Loss Quick Calculator

ਅੰਦਾਜ਼ਾ ਲਗਾਓ ਘੁਲਾਵਟ and ਅਯਸ ਨੁਕਸਾਨ from ਯੋਜਿਤ width, ਖਨਨ ਕੀਤਾ width, and ਸੀਮਾ split error.

This quick ਕੈਲਕੁਲੇਟਰ is for ਭੂਗਰਭੀ mining, short-term planners, and engineers who need a fast first ਜਾਂਚ ਕਰੋ. It stays width-based instead of trying to solve a full ਅਪਟੀਮਾਈਜੇਸ਼ਨ problem.

ਤੁਲਨਾ ਕਰੋ ਯੋਜਿਤ width, ਖਨਨ ਕੀਤਾ width, and ਸੀਮਾ split in one view ਸਮਰਥਿਤ m / ft / cm / mm / in Accepts ਦੋਵੇਂ ਦਸ਼ਮਲਵ points and ਦਸ਼ਮਲਵ commas ਨਤੀਜਾ ਕਾਪੀ ਕਰੋs for meeting ਨੋਟਸ and handoff

How to use

  1. Enter the planned width.
  2. Use mined width for a simple check, or turn on boundary split mode when you want overbreak and underbreak shown separately.
  3. Choose the unit and decimal settings to match the way your team reports widths and percentages.
  4. Copy the result or share the current state by URL when you need to hand it off.

Examples

Simple ਓਵਰਬ੍ਰੇਕ example

P=3.00 m, A=3.30 m
Output
Dilution 9.09%, ore loss 0.00%, ore recovery 100.00%

ਸੀਮਾ split example

P=3.00 m, A=3.10 m, O=0.20 m, U=0.10 m
Output
Dilution 6.45%, ore loss 3.33%, mismatch 0.00 m

ਇੰਪੀਰੀਅਲ example

P=10 ft, A=10.5 ft
Output
Dilution 4.76%, ore loss 0.00%, ore recovery 100.00%

ਸ਼ਬਦਾਵਲੀ

Dilution

The ਸਾਂਝਾ ਕਰੋ of waste or unwanted ਸਮੱਗਰੀ ਮਿਲਿਆ-ਜੁਲਿਆ into the ਖਨਨ ਕੀਤਾ width.

Ore loss

The ਸਾਂਝਾ ਕਰੋ of ਅਯਸ that should have been ਖਨਨ ਕੀਤਾ but was ਖੱਬੇ behind.

Overbreak

ਯੋਜਨਾ ਤੋਂ ਵੱਧ ਵੇਸਟ ਪਾਸੇ ਲਈ ਗਈ ਵਾਧੂ ਚੌੜਾਈ।

Underbreak

The missing width on the ਅਯਸ side when the face is not opened as ਯੋਜਿਤ.

Boundary split

A way of separating ਓਵਰਬ੍ਰੇਕ and ਅੰਡਰਬ੍ਰੇਕ so the field ਜਾਂਚ ਕਰੋ is easier to read.

Formulas

  • Simple ਮੋਡ: delta = A - P
  • Simple ਮੋਡ: ਘੁਲਾਵਟ = max(0, A - P) / A × 100
  • Simple ਮੋਡ: ਅਯਸ ਨੁਕਸਾਨ = max(0, P - A) / P × 100
  • ਸੀਮਾ ਮੋਡ: ਅਯਸ recovered = max(0, P - U)
  • ਸੀਮਾ ਮੋਡ: waste included = max(0, O)
  • ਸੀਮਾ ਮੋਡ: ਘੁਲਾਵਟ = waste included / (ਅਯਸ recovered + waste included) × 100
  • ਸੀਮਾ ਮੋਡ: ਅਯਸ ਨੁਕਸਾਨ = min(100, U / P × 100)

ਅਕਸਰ ਪੁੱਛੇ ਸਵਾਲ

When should I use boundary split mode?
Use it when you can separate overbreak and underbreak. If you only know mined width, simple mode is enough.
What if actual width and the boundary split do not match?
The tool shows a mismatch warning and keeps the cross-check visible. Recheck the split or the measurement.
Can I enter decimal commas?
Yes. The input parser accepts both decimal points and decimal commas.
Can ore recovery go below 0%?
No. Recovery is clamped to the 0% to 100% range so the quick check stays stable.
Is this a substitute for reconciliation or planning software?
No. It is a first-pass calculator for quick checks, not a full reconciliation or optimization tool.

ਨੋਟਸ

  • This is a width-based quick check. It does not replace block models, detailed stope design, or reconciliation workflows.
  • Enter all widths in the same unit before comparing them.
  • If underbreak exceeds the planned width, ore recovery is clamped to 0% and a warning is shown.
  • The calculations stay in your browser and are not sent to a server.