Paint Specification and Estimate Draft Generator Барилгын хэрэгслүүд
Browser Draft
Монгол
English 日本語 ລາວ Монгол Oʻzbekcha Тоҷикӣ Кыргызча Қазақша Azərbaycan Հայերեն ქართული العربية Български čeština Dansk Deutsch Ελληνικά Español Français हिन्दी ગુજરાતી ಕನ್ನಡ मराठी മലയാളം Srpski Slovenčina Slovenščina Kiswahili Hrvatski Indonesia Italiano 한국어 Lietuvių Latviešu Nederlands Norsk Svenska Polski Português Română Русский Українська Беларуская Shqip اردو தமிழ் తెలుగు Türkçe ภาษาไทย Tiếng Việt 简体中文 繁體中文 עברית ខ្មែរ Melayu မြန်မာ ਪੰਜਾਬੀ සිංහල Tagalog is

Будгийн спецификац ба төсөвт эх загвар үүсгэгч

Талбай, суурь, элэгдэл, зорилтот бат бөх чанар, өнгөлгөөний гялбаагаас борлуулалтад бэлэн бүрэх саналын эхийг үүсгэнэ.

Энэ эх нь олон хэл, хуваалцах URL, үйлчлүүлэгчид, тооцоологчид, талбайн багт хурдан дамжуулах зориулалттай.

Sales-ready proposal text
Multilingual by design
Shareable draft URL
How to use Example cases Formulas Notice
Хэрхэн ашиглах вэ

Талбай, суурь, элэгдэл, зорилтот бат бөх чанар, өнгөлгөөний гялбаагаас борлуулалтад бэлэн бүрэх саналын эхийг үүсгэнэ.

  1. Choose the unit system and enter the area.
  2. Select the substrate, deterioration level, target durability, and finish gloss.
  3. Open advanced settings if you need project scope, exposure, tone, or quantity policy changes.
  4. Review the draft, then copy the result or share the URL with the current state.
Жишээ

Input

Exterior mortar repaint

Input 120 m² / exterior / mortar / moderate deterioration / 10 years / satin

Output Work items: protection, washing, crack repair, primer, finish coat x2, and cleanup. Estimated quantities: primer about 14.2 L, finish coat about 28.4 L, repair area about 8.4 m².

Steel maintenance coating

Input 80 ft² / steel / rust / 7 years / semi-gloss

Output Work items: protection, degreasing, rust treatment, sanding, primer, finish coat x2, and cleanup. Estimated quantities: primer about 1.3 gal, finish coat about 2.6 gal, repair area about 9 ft².

Томъёо

  • Paint quantity = area × coat count ÷ reference coverage × safety allowance
  • Repair area = area × deterioration ratio
  • Balanced quantity policy adds a smaller allowance than conservative policy
  • Draft quantities are rounded up for sales use and must be rechecked on site

Түгээмэл асуултууд

Can I use this output directly in an estimate?

Use it as a draft. Final quantities, pricing, code compliance, and site conditions still need to be checked before release.

Does the same logic work in other languages?

Yes. The page is translated per language, but the calculation and draft rules stay the same.

Can it handle steel and wood surfaces?

Yes. The draft changes the prep items, exclusions, and quantity assumptions based on the selected substrate.

Are the quantities exact purchase quantities?

No. They are sales-oriented estimates. Confirm the final order quantities against product specifications and waste allowances.

Does it support both m² and ft²?

Yes. Switch the unit system and the area and coating quantities will follow that system.

Тайлбар толь

Substrate
The surface being coated, such as concrete, mortar, steel, wood, or tile.
Deterioration
The condition of the existing surface, including chalking, peeling, cracking, rust, and mold.
Gloss
The finish sheen level, from matte to glossy.
Primer
A base coat that improves adhesion and prepares the surface for the finish coats.
Topcoat
The final finish coat that provides appearance and weather protection.
Exclusion
Work that is not included in the draft and must be confirmed separately.

Тэмдэглэл

  • This tool creates a sales draft, not a final estimate.
  • Asbestos, lead, solvents, scaffolding, waste disposal, and legal requirements must be checked separately.
  • Color, gloss, film build, warranty, and final system selection depend on the manufacturer and site conditions.
  • Confirm the print layout in Chrome, Edge, and Safari before using it in customer-facing documents.