Keep one partija together
Ieraksts a single krāsns run with a partija label and krāsns name so the vēsture stays easy to scan.
Drošības piezīmes
Kokogles partiju ieraksti
Capture ievade amount, sākt and beigas times, novērojumu piezīmes, temperatūras piezīmes, and iznākums for each partija.
Šī lapa ir veidota globālai lietošanai: tā atbalsta vairākas valodas, vietējo laiku, RTL izkārtojumus un tikai ierīces krātuvi.
Ko tas dara
Ieraksts a single krāsns run with a partija label and krāsns name so the vēsture stays easy to scan.
Capture lokāls sākt and finish times and see the duration at a glance.
Store smoke, draft, sealing, krāsns temperatūra, and other lauks piezīmes in one ieraksts.
Hand the same ieraksts to spreadsheets, reports, or other systems without retyping.
Saglabāt drafts and vēsture on the ierīce, then reload, duplicate, or delete them later.
The UI is translated from English and prepared for future languages and RTL layouts.
Kā lietot
Piemēri
A complete ieraksts with times, piezīmes, and iznākums.
Ievade
Partija 2026-03-26 A / Krāsns 1 / ievade 28.4 kg / sākt 2026-03-26T08:10 / beigas 2026-03-26T19:25 / iznākums 18.5%
Rezultāts
Saved as a complete ieraksts with 11 h 15 min duration and ready-to-eksportēt CSV/JSON vēsture.
Use this when the ieraksts still needs confirmation.
Ievade
Partija 2026-03-27 B / Krāsns 2 / ievade 1.2 t / sākt 2026-03-27T20:15 / beigas 2026-03-28T08:30 / iznākums 120%
Rezultāts
Marked for review because the iznākums is outside the normal range and needs confirmation.
Vārdnīca
partija
One krāsns run or ievade cycle recorded as one unit.
ievade amount
The amount loaded into the krāsns for the partija.
iznākums
The percentage relationship between the output and the ievade amount.
novērojums piezīme
Piezīmes about smoke, draft, sealing, flame, or other visible conditions.
temperatūra piezīme
Piezīmes about krāsns temperatūra, probe position, or ambient conditions.
JSON
A structured eksportēt format that is easy to hand to other systems.
Formula piezīmes
duration_minutes = end_at - start_at
yield_percent = output_mass / charge_amount * 100
average_yield = sum(yield_percent) / n
total_charge = sum(charge_amount)
state = draft / inProgress / complete / review
Biežāk uzdotie jautājumi
Yes. Data stays in the pārlūkprogramma on the ierīce, so you can keep recording even without a connection.
Leave the beigas time blank. The ieraksts will stay in progress until you fill it in.
Yes. Iznākums is optional, and the page will remind you if it is still blank.
Yes. You can use kg, t, m3, stere, cord, or a custom label, and the settings let you choose a default.
Use CSV when you want a spreadsheet-friendly table. Use JSON when another system needs structured data.
Yes. The UI is translated from English and prepared for additional languages and RTL layout support.
Piezīmes