Metric quick check
ຂໍ້ມູນເຂົ້າ
10,000 m² open water area, 15,000 m³ inflow, 12,000 m³ drainage, 4,500 m³ reuse, 800 m³ storage increase
Output
Evaporation is about 900 m³, net balance is about +5,800 m³, and reuse share is about 23%.
Mining calculation
Browser-only
Metric / imperial
Climate-adjusted evaporation
ເຄື່ອງຄຳນວນດຸນນ້ຳຂຸດຄົ້ນ
Estimate a mining site water balance from inflow, drainage, reuse, evaporation, and storage change in one place.
Period totals, daily averages, a waterfall chart, and shareable URLs stay in the browser.
ຂໍ້ຄວນຮູ້ດ້ານຄວາມປອດໄພ
ການຄຳນວນທັງໝົດເກີດຂຶ້ນໃນບຣາວເຊີນີ້ ແລະບໍ່ມີຂໍ້ມູນຖືກສົ່ງໄປ server.
- This is a quick balance check, not a hydrology or permitting model.
- Evaporation is estimated from area and simple climate factors, so use measured data when you have it.
- Check the unit system before sharing a result.
ສິ່ງທີ່ເຄື່ອງມືນີ້ສະແດງ
A fast summary for meetings and reports.
- Period total and daily average are derived from the same calculation.
- Climate zone and local conditions adjust the evaporation estimate.
- Shareable URLs can reproduce the current state.
ວິທີໃຊ້
- Choose the reporting period and unit system.
- Enter area, climate, inflow, drainage, reuse, and storage change.
- Load a sample if you want a starting point.
- Review the waterfall chart, breakdown table, and share URL.
ຕົວຢ່າງ
ຂໍ້ມູນເຂົ້າ / Output
Imperial quick check
ຂໍ້ມູນເຂົ້າ
1 acre open water area, 500,000 US gal inflow, 650,000 US gal drainage, 120,000 US gal reuse, 40,000 US gal storage increase
Output
Evaporation is about 288,700 US gal and net balance is about -358,700 US gal.
Formulas
- tempFactor = clamp(1 + (temperature - 20) × 0.025, 0.65, 1.45)
- humidityFactor = clamp(1 - (humidity - 50) × 0.0035, 0.55, 1.25)
- climateFactor = clamp(tempFactor × humidityFactor × windFactor × sunFactor, 0.5, 1.8)
- evaporation = area × depth × period
- net balance = inflow + reuse - drainage - evaporation - storage change
Glossary
- ຜົນລວມຂອງໄລຍະ
- The total volume over the selected reporting period.
- ສະເລ່ຍລາຍວັນ
- The period total divided by the number of days.
- ປັດໄຈສະພາບອາກາດ
- A simple multiplier that adjusts the base evaporation depth.
- ການປ່ຽນແປງການເກັບກຳ
- Water added to or removed from storage during the period.
ຄຳຖາມທີ່ພົບບໍ່ຍາກ
Is this a replacement for a water balance model?
No. It is a quick reporting and comparison tool.
How is evaporation estimated?
The tool multiplies a base depth by simple climate factors and the open water area.
Can I compare periods in different unit systems?
Yes. The same input state can be shared with a URL, and the unit system is stored with it.
Can I leave the open water area at zero?
Yes. Evaporation becomes zero and the rest of the balance still works.
ໝາຍເຫດ
- This tool is for quick balance checks and reports, not detailed hydrology.
- If the climate looks extreme, treat the evaporation estimate as a rough guide.
- Drainage that is much larger than inflow plus reuse usually means a unit mistake.
- Use the same unit system when you compare runs.