Initial state (no standard selected)
Input
Standard set: not selected
Output
No numeric values are shown; empty-state guidance is displayed
Pipe Dimensions Chart
Standard set ಆಯ್ಕೆ ಮಾಡಿ Nominal / OD / ID / thickness ತೋರಿಸಿ.
Source, standard name ಮತ್ತು edition ಅನ್ನು ಗೋಚರವಾಗಿರಿಸಿ ಮತ್ತು ಅದೇ table ಅನ್ನು PDF ಆಗಿ save ಮಾಡಿ.
No numeric values before standards are fixed
Sticky source bar above the table
One-click print with A4/Letter switch
What this tool covers
- Check Nominal / OD / ID / thickness for each standard set.
- For schedule-based standards, values stay hidden until required conditions are selected.
- Filter only by Nominal to keep lookup intent focused.
- Print or save PDF while preserving the source bar context.
How to use
- Standard set ಆಯ್ಕೆ ಮಾಡಿ.
- ಅಗತ್ಯವಿದ್ದರೆ Schedule ಆಯ್ಕೆ ಮಾಡಿ.
- ಐಚ್ಛಿಕವಾಗಿ Nominal ಮೂಲಕ filter ಮಾಡಿ.
- Source bar ನಲ್ಲಿ source, standard name ಮತ್ತು condition ಪರಿಶೀಲಿಸಿ.
- Choose paper size and run Print / PDF.
Sample
Schedule-based lookup
Input
Standard set: ASME B36.10M (2022), Schedule: 40, Nominal search: NPS 2
Output
Only matching rows are shown, with standard/edition/condition in the source bar
Glossary
Nominal
A designated pipe size name, not always equal to measured dimensions.
OD
Outside Diameter.
ID
Inside Diameter. Displayed from source data or derived as OD−2t.
thickness
Wall thickness.
Schedule
Wall-thickness series. Different schedules change thickness and ID.
Formulas
- ID (derived mode) = OD − 2 × thickness
- Displayed values follow per-standard display precision rules.
FAQ
Standard set ಆಯ್ಕೆ ಮಾಡುವವರೆಗೆ values ಏಕೆ ಕಾಣುವುದಿಲ್ಲ?
Reference ತಪ್ಪುಗಳನ್ನು ತಪ್ಪಿಸಲು. ಅಗತ್ಯ condition ಸ್ಥಿರವಾದ ನಂತರ ಮಾತ್ರ values ತೋರಿಸಲಾಗುತ್ತದೆ.
Print output ನಲ್ಲಿ source information ಸೇರಿತೇ?
ಹೌದು. Source bar print output ಮೇಲ್ಭಾಗದಲ್ಲಿ ಸೇರಿಸಲಾಗುತ್ತದೆ.
What does the A4/Letter switch affect?
It controls print page size via @page size.
Does this tool load data from a server?
No. All standard data is embedded in HTML and processed in the browser.
Notes
- Nominal size may differ from measured dimensions.
- Always verify tolerances against original standards.
- For derived ID display, visible precision can cause minor differences.
- For final engineering decisions, always follow the latest official standard text.