Five վառարան փուլեր Տեղային alerts Միայն սարքում պահպանում Բազմալեզու աջակցություն RTL-ին հարմարեցված դասավորություն

Ածխային վառարանի ցիկլի ժամաչափ

Keep վառում, տաքացում, ածխացում, փակում, and սառեցում on one field-ready timeline.

Ծանուցումներ stay on the device, and the սևագիր is saved locally, so the timer still works when the connection is weak or unavailable.

Inputs, drafts, and logs stay in this բրաուզեր and are never sent to a սերվեր. Ծանուցումներ stay on the device, and the timer keeps working without a connection.

Ածխային վառարանի ցիկլի ժամաչափ

Adjust the փուլ list to match your վառարան, then սկսել the ցիկլ at վառում.

Կարգավորումներ

The սևագիր is always saved locally. Use the toggles below to control sharing and alerts.

Ինչ է անում

Ծանուցումներ stay on the device, and the timer keeps working without a connection.

Օֆլայն
Edit փուլեր on site

Reorder վառում, տաքացում, ածխացում, փակում, and սառեցում to match the վառարան run.

Use տեղային alerts

Բրաուզեր ծանուցումներ and in-page toasts stay on the device and անում է not need a սերվեր.

Keep a private սևագիր

Ցիկլ details, notes, and logs are saved on this բրաուզեր only.

Պատրաստ է համաշխարհային օգտագործման համար

Դասավորությունը հետևում է ակտիվ տեղային լեզվին և պատրաստ է ապագա լեզուների ավելացման համար.

Լռելյայն փուլեր

The built-in sequence is a starting point. Edit the durations and notes to fit your վառարան and fuel խմբային.

Վառում
20 min

Build a stable fire bed and settle the վառարան.

Տաքացում
60 min

Raise the վառարան temperature and watch the exhaust.

Ածխացում
90 min

Track the ածխացում window and vent changes.

Փակում
30 min

Փակել the air inlets and switch to փակում steps.

Սառեցում
480 min

Leave enough time for the վառարան to cool safely.

Օրինակներ

Standard վառարան run

Վառում 20 min / Տաքացում 60 min / Ածխացում 90 min / Փակում 30 min / Սառեցում 480 min

Total time is about 11 h 20 min. You can fire a տեղային alert at every փուլ change.

Short test ցիկլ

5 փուլեր × 1 minute each

Five minutes end-to-end, ideal for պահպանել/restore and alert checks.

Ինչպես օգտագործել

  1. Enter the ցիկլ name, վառարան label, and notes.
  2. Adjust the փուլ order and durations to match your վառարան procedure.
  3. Սկսել at վառում and follow the remaining time and ժամանակացույց.
  4. Պահպանել a սևագիր if you need to pick up the same run later.

FAQ

Does it work օֆլայն?

Yes. Once the page is loaded, the timer, սևագիր, and in-page alerts work without a network connection.

Can I change the փուլ order?

Yes. Տեղափոխել փուլեր up or down, կրկնօրինակել them, or հեռացնել them before you սկսել the run.

Ի՞նչ է պատահում, եթե ես վերաբեռնեմ էջը?

The locally saved սևագիր is restored, including the current ցիկլ setup and timer position.

Will բրաուզեր ծանուցումներ always appear?

No. The բրաուզեր must հենում ծանուցումներ and the user must allow them. If not, the page still shows տեղային toasts.

Ժամանակացույցերը ճի՞շտ են?

They are only as accurate as the device clock and the փուլ durations you enter. Use վառարան safety procedures first.

Notes

  • Սա գործառնական օգնություն է, ոչ թե անվտանգության երաշխիք կամ որակի հավաստագիր.
  • Follow your վառարան's own procedure, safety rules, and environmental checks first.
  • Մաքրել the saved սևագիր after use on a shared device.
  • Տասնորդական րոպեները ընդունում են թե՛ `.`-ը, թե՛ `,`-ը.
  • Բրաուզեր ծանուցումներ require permission; if they are denied, the timer still works.