બાગ રોપણી લેઆઉટ ગણક

વિસ્તાર, row spacing, tree spacing, aisle width, અને pollinizer ratio પરથી જરૂરી seedling અને અંદાજિત row count ગણો.

apples, citrus, mangoes, olives, અને અન્ય બાગ પાકો માટે અલગ tree spacing સાથે કામ કરે છે.

apples, citrus, mangoes, અને olives માટે કામ કરે છે વિસ્તારથી rows અને tree count અંદાજે છે pollinizer ratio અને spare seedlings સાથે ગણતરી કરે છે m² / ha / acre અને m / cm / ft / in સપોર્ટ કરે છે

How to use

  1. Choose the area and its unit.
  2. Enter row spacing, tree spacing, aisle width, and the pollinizer ratio.
  3. If needed, refine the field aspect ratio and spare rate in Settings.
  4. Check the result, then copy the report or share URL for nursery orders and field planning.

Sample cases

Estimate a 1 ha apple orchard

Input

Area 1 ha, row spacing 4 m, tree spacing 2 m, aisle width 3 m, pollinizer ratio 10%, field aspect ratio 1.0, spare rate 5%

Output

Estimated rows 24, trees per row 50, planting positions 1,200, pollinizer trees 120, spare seedlings 60, required seedlings 1,260

Estimate a 4 acre olive orchard

Input

Area 4 acre, row spacing 20 ft, tree spacing 12 ft, aisle width 10 ft, pollinizer ratio 5%, field aspect ratio 1.0, spare rate 5%

Output

Estimated rows 20, trees per row 34, planting positions 680, pollinizer trees 34, spare seedlings 34, required seedlings 714

See pollinizer rounding in a 9 m² block

Input

Area 9 m², row spacing 1 m, tree spacing 1 m, aisle width 0, pollinizer ratio 10%, field aspect ratio 1.0, spare rate 0%

Output

Planting positions 9, pollinizer trees 1, main cultivar trees 8

Glossary

row spacing

પાસપાસના rows ના કેન્દ્રો વચ્ચેનું અંતર.

tree spacing

એ જ row માં neighboring trees ના કેન્દ્રો વચ્ચેનું અંતર.

aisle width

લોકો અથવા યંત્રોના access માટે રાખેલી પહોળાઈ.

pollinizer tree

પરાગણમાં મદદરૂપ tree variety, જે main trees થી અલગ ગણાય છે.

spare seedlings

replacement અને નુકસાન માટે વધારામાં મંગાવેલા seedlings.

field aspect ratio

લાંબી બાજુ ÷ નાની બાજુ. 1.0 એટલે ચોરસ block.

Formulas

ગણક અંદરથી m² અને m પર normalize કરે છે.

  • નાની બાજુ = √(વિસ્તાર ÷ field aspect ratio)
  • લાંબી બાજુ = નાની બાજુ × field aspect ratio
  • વપરાશયોગ્ય નાની બાજુ = max(નાની બાજુ - aisle width, 0)
  • અંદાજિત rows = floor(વપરાશયોગ્ય નાની બાજુ ÷ row spacing)
  • દરેક row માં trees = floor(લાંબી બાજુ ÷ tree spacing)
  • planting positions = અંદાજિત rows × દરેક row માં trees
  • pollinizer trees = ceil(planting positions × pollinizer ratio ÷ 100)
  • spare seedlings = ceil(planting positions × spare rate ÷ 100)
  • જરૂરી seedlings = planting positions + spare seedlings

Notes

  • આ સાધન માત્ર અંદાજ આપે છે. વાસ્તવિક layout field shape, slope, borders, drainage strips, અને road access સાથે બદલાય છે.
  • pollinizer ratio ફક્ત count split છે. crop અને pollination જરૂરિયાત મુજબ actual placement બદલો.
  • આયાત કરેલા seedlings અથવા overseas cultivars વાપરતાં local production standards અને nursery grades પહેલાં અનુસરો.

Frequently asked questions

Is the row count exact?

No. It is an estimate from the area and field aspect ratio, not a CAD-accurate layout. If you know the block shape, set the aspect ratio to get closer to the real row count.

How is aisle width used?

It is treated as the main aisle deducted from the short side of the block. If you have several aisles, enter the total width.

Does the pollinizer ratio decide the row pattern?

No. It only splits the total trees into main cultivar and pollinizer counts. The actual row pattern depends on the crop and orchard design.

Can I use it for crops other than apples?

Yes. It works for citrus, mangoes, olives, and other orchard crops with known tree and row spacing.

Can I switch units?

Yes. Area supports m² / ha / acre / ft², and length supports m / cm / ft / in.