Generador de borradores de especificación y presupuesto de pintura

Genera un borrador de propuesta de pintura listo para ventas a partir del área, el sustrato, el deterioro, la durabilidad objetivo y el brillo del acabado.

El borrador está pensado para uso multilingüe, URLs compartibles y entrega rápida a clientes, tasadores y equipos de obra.

Texto de propuesta listo para ventas

Diseñado para varios idiomas

URL de borrador compartible

How to use Example cases Formulas Notice

How to use

Genera un borrador de propuesta de pintura listo para ventas a partir del área, el sustrato, el deterioro, la durabilidad objetivo y el brillo del acabado.

Choose the unit system and enter the area.
Select the substrate, deterioration level, target durability, and finish gloss.
Open advanced settings if you need project scope, exposure, tone, or quantity policy changes.
Review the draft, then copy the result or share the URL with the current state.

Ejemplo

Input

Exterior mortar repaint

Input 120 m² / exterior / mortar / moderate deterioration / 10 years / satin

Output Work items: protection, washing, crack repair, primer, finish coat x2, and cleanup. Estimated quantities: primer about 14.2 L, finish coat about 28.4 L, repair area about 8.4 m².

Steel maintenance coating

Input 80 ft² / steel / rust / 7 years / semi-gloss

Output Work items: protection, degreasing, rust treatment, sanding, primer, finish coat x2, and cleanup. Estimated quantities: primer about 1.3 gal, finish coat about 2.6 gal, repair area about 9 ft².

Fórmulas

Paint quantity = area × coat count ÷ reference coverage × safety allowance
Repair area = area × deterioration ratio
Balanced quantity policy adds a smaller allowance than conservative policy
Draft quantities are rounded up for sales use and must be rechecked on site

Preguntas frecuentes

Can I use this output directly in an estimate?

Use it as a draft. Final quantities, pricing, code compliance, and site conditions still need to be checked before release.

Does the same logic work in other languages?

Yes. The page is translated per language, but the calculation and draft rules stay the same.

Can it handle steel and wood surfaces?

Yes. The draft changes the prep items, exclusions, and quantity assumptions based on the selected substrate.

Are the quantities exact purchase quantities?

No. They are sales-oriented estimates. Confirm the final order quantities against product specifications and waste allowances.

Does it support both m² and ft²?

Yes. Switch the unit system and the area and coating quantities will follow that system.

Glosario

Substrate: The surface being coated, such as concrete, mortar, steel, wood, or tile.
Deterioration: The condition of the existing surface, including chalking, peeling, cracking, rust, and mold.
Gloss: The finish sheen level, from matte to glossy.
Primer: A base coat that improves adhesion and prepares the surface for the finish coats.
Topcoat: The final finish coat that provides appearance and weather protection.
Exclusion: Work that is not included in the draft and must be confirmed separately.

Aviso

Esta herramienta genera un borrador comercial, no un presupuesto final.
El amianto, el plomo, los disolventes, los andamios, la gestión de residuos y los requisitos legales deben revisarse por separado.
El color, el brillo, el espesor de película, la garantía y la selección final del sistema dependen del fabricante y de las condiciones de obra.
Confirma el diseño de impresión en Chrome, Edge y Safari antes de usarlo en documentos para clientes.