Dimensional Weight Calculator | Compare Chargeable Weight with L×W×H
Deutsch
English 日本語 ລາວ Монгол Oʻzbekcha Тоҷикӣ Кыргызча Қазақша Azərbaycan Հայերեն ქართული العربية Български বাংলা čeština Dansk Deutsch Ελληνικά Español Eesti Suomi Français हिन्दी ગુજરાતી ಕನ್ನಡ मराठी മലയാളം Srpski Slovenčina Slovenščina Kiswahili Hrvatski Magyar Indonesia Italiano 한국어 Lietuvių Latviešu Nederlands Norsk Svenska Polski Português Română Русский Українська Беларуская Shqip اردو தமிழ் తెలుగు Türkçe ภาษาไทย Tiếng Việt 简体中文 繁體中文 עברית ខ្មែរ Melayu မြန်မာ ਪੰਜਾਬੀ සිංහල Tagalog नेपाली فارسی

EOQ Calculator

Calculate volumetric weight from L×W×H and carrier divisor, then compare with actual weight to show chargeable weight.

See formula What is divisor? Go to FAQ
Dimensions (L / W / H)
e.g. 40×30×20
Actual Weight
Chargeable weight is usually the greater of actual and volumetric weight (contract exceptions apply).
Carrier Divisor
divisor unit: cm³/kg
Units changed. Check the divisor value.
Divisor varies by carrier, service, and contract. Check your contract or rate card for “Dimensional/Volumetric weight divisor” and enter it here.
My Rules
Saved rules
Rounding settings
Rounding rules vary by carrier/service (e.g., round up to 1 unit or 0.5 unit).
Quantity (multiple packages)
Show results
Ergebnisse

Chargeable Weight

—
Enter actual weight to compare.
Per package —
Gesamt —
Actual weight —
Volumetric weight —
Volumen —
divisor —
Formel —
Rundung —
Verlauf (letzte 5)
No history yet. Saved on copy/share.

See formula

Volume: V = L × W × H
Volumetric (dimensional) weight: VW = V / divisor
Chargeable weight: CW = max(ActualWeight, VW)
Rounding (as configured): CW_rounded = round_mode(CW, step)
When switching units, divisor units change—always verify the divisor value.

Häufig gestellte Fragen (FAQ)

Which divisor should I use?

Divisors vary by carrier, service, and contract. Check your contract/rate card for “Dimensional/Volumetric weight divisor” and enter it. Presets are references only.

Which is charged, actual or volumetric weight?

Most pricing uses the larger of the two (exceptions depend on your contract). This tool shows the comparison instantly.

Rounding differs (1 kg, 0.5 kg, etc.)

Rounding varies by carrier/service. Choose rounding mode (ceil/round/floor) and step (1.0/0.5/0.1) to match actual rules.

Does the order of L/W/H matter?

No. Volume is multiplicative, so order does not matter.

What about multiple identical packages (qty)?

Enter qty to see total chargeable weight for identical packages. If sizes/weights differ, calculate separately (history helps).

Divisor, rounding, and minimum chargeable weights vary by carrier/service/contract.
This tool uses a general calculation method. Final billing follows carrier rules.