ਰੇਸ਼ਮ ਪਾਲਣ ਉਪਜ ਅਤੇ ਲਾਗਤ ਸਿਮੂਲੇਟਰ

Estimate ਬੈਚ ਆਮਦਨ, ਲਾਗਤ, and ਮੁਨਾਫ਼ਾ direction from ਪੱਤਾ amount, rearing days, ਮੌਤ ਦਰ, ਕੋਕੂਨ ਉਪਜ, ਗ੍ਰੇਡਿੰਗ ratios, ਰੀਲਿੰਗ ਉਪਜ, and ਮਜ਼ਦੂਰੀ ਸਮਾਂ.

ਤੁਲਨਾ ਕੋਕੂਨ ਵਿਕਰੀ and silk conversion side by side, with no ਸਰਵਰ required.

ਤੁਲਨਾ ਪੱਤਾ, ਕੋਕੂਨ, and ਮਜ਼ਦੂਰੀ inputs on one screen View ਕੋਕੂਨ sale and silk conversion in parallel Supports kg / lb / t and ਘੰਟਾ / ਮਿੰਟ / ਦਿਨ ਸਾਂਝਾ by URL or ਰੱਖੋ everything ਸਥਾਨਕ
ਸਹਾਇਤਾ

ਇਹ ਟੂਲ ਕੀ ਕਰ ਸਕਦਾ ਹੈ

See ਬੈਚ ਆਮਦਨ, ਲਾਗਤ, and ਮੁਨਾਫ਼ਾ quickly.
ਤੁਲਨਾ ਕੋਕੂਨ ਵਿਕਰੀ and silk conversion under the same assumptions.
Treat ਮੌਤ ਦਰ as a signal for improvement, not just a loss number.
Bring it to the ਖੇਤਰ with ਬਹੁਭਾਸ਼ੀ, multi-ਮੁਦਰਾ, and multi-ਇਕਾਈ support.

ਵਰਤੋਂ ਦਾ ਤਰੀਕਾ

  1. Enter the basic values such as ਪੱਤਾ amount, ਕੋਕੂਨ ਉਪਜ, and ਮਜ਼ਦੂਰੀ ਸਮਾਂ.
  2. Choose the ਵਿਕਰੀ ਰਸਤਾ and ਕੋਕੂਨ pricing conditions.
  3. Check ਆਮਦਨ, ਲਾਗਤ, ਮੁਨਾਫ਼ਾ, and the gap in the ਨਤੀਜਾ cards.
  4. ਕਾਪੀ, ਸਾਂਝਾ, export CSV, or print when needed.

ਉਦਾਹਰਨਾਂ

ਤੁਰੰਤ baseline ਉਦਾਹਰਨ

ਇਨਪੁੱਟ

Use only ਪੱਤਾ amount, ਕੋਕੂਨ ਉਪਜ, and ਮਜ਼ਦੂਰੀ ਸਮਾਂ to get a first ਮੁਨਾਫ਼ਾ read.

ਆਉਟਪੁੱਟ

You can confirm the ਮੁਨਾਫ਼ਾ direction immediately using ਕੋਕੂਨ ਵਿਕਰੀ as the baseline.

ਵਿਸਤ੍ਰਿਤ ਗ੍ਰੇਡਿੰਗ ਉਦਾਹਰਨ

ਇਨਪੁੱਟ

Enter grade ratios and ਇਕਾਈ prices to ਤੁਲਨਾ ਕੋਕੂਨ ਵਿਕਰੀ pricing.

ਆਉਟਪੁੱਟ

Changing ਵਿਸਤ੍ਰਿਤ conditions shows how ਆਮਦਨ moves even with the same ਕੋਕੂਨ ਉਪਜ.

Silk conversion ਉਦਾਹਰਨ

ਇਨਪੁੱਟ

Enter ਰੀਲਿੰਗ ਉਪਜ and silk ਕੀਮਤ to ਤੁਲਨਾ the conversion ਰਸਤਾ.

ਆਉਟਪੁੱਟ

You can ਤੁਲਨਾ the gap against ਕੋਕੂਨ ਵਿਕਰੀ after including ਰੀਲਿੰਗ ਪ੍ਰੋਸੈਸਿੰਗ ਲਾਗਤ.

ਸ਼ਬਦਾਵਲੀ

ਕੋਕੂਨ

The thread ਭਾਰ produced by silkworms. It is the ਭਾਰ basis for ਵਿਕਰੀ and ਰੀਲਿੰਗ.

ਗ੍ਰੇਡਿੰਗ

Separating cocoons by quality. ਆਮਦਨ is calculated from grade ratios and ਇਕਾਈ prices.

ਰੀਲਿੰਗ ਉਪਜ

This is how strongly the ਮਿੱਟੀ resists pH change. It is influenced by CEC, organic matter, and clay minerals.

ਮੌਤ ਦਰ rate

The ਸਾਂਝਾ lost during rearing. It helps evaluate actual ਨਤੀਜੇ and room for improvement.

ਮਜ਼ਦੂਰੀ ਸਮਾਂ

The working ਸਮਾਂ used for rearing. It is converted into daily and hourly efficiency.

ਪੱਤਾ amount

The amount of mulberry ਪੱਤਾ used for rearing. It is a key ਲਾਗਤ base.

ਕੋਕੂਨ ਉਪਜ

The amount of ਕੋਕੂਨ collected in one ਬੈਚ. It is the base for ਆਮਦਨ calculation.

ਗਹਿਰਾਈ ਉਲਟਾਅ

The ਕੀਮਤ or amount at which ਮੁਨਾਫ਼ਾ becomes zero.

ਸੁਤਰ

  • ਕੋਕੂਨ ਵਿਕਰੀ ਆਮਦਨ = ਕੋਕੂਨ ਉਪਜ × weighted ਕੋਕੂਨ ਕੀਮਤ
  • Raw silk equivalent = ਕੋਕੂਨ ਉਪਜ × ਰੀਲਿੰਗ ਉਪਜ
  • Silk ਵਿਕਰੀ ਆਮਦਨ = raw silk equivalent × silk ਕੀਮਤ
  • Total ਲਾਗਤ = seed ਲਾਗਤ + ਪੱਤਾ ਲਾਗਤ + ਮਜ਼ਦੂਰੀ ਲਾਗਤ + ਰੀਲਿੰਗ ਪ੍ਰੋਸੈਸਿੰਗ ਲਾਗਤ + other ਲਾਗਤ
  • ਮੁਨਾਫ਼ਾ = ਆਮਦਨ - total ਲਾਗਤ
  • Margin = ਮੁਨਾਫ਼ਾ ÷ ਆਮਦਨ
  • Break-even ਕੋਕੂਨ ਕੀਮਤ = total ਲਾਗਤ ÷ ਕੋਕੂਨ ਉਪਜ
  • ਮੌਤ ਦਰ-adjusted ideal ਆਮਦਨ = ਆਮਦਨ ÷ survival rate

ਅਕਸਰ ਪੁੱਛੇ ਜਾਂਦੇ ਸਵਾਲ (FAQ)

ਤੁਰੰਤ ਅਤੇ ਵਿਸਤ੍ਰਿਤ ਵਿੱਚ ਕੀ ਫ਼ਰਕ ਹੈ?

ਤੁਰੰਤ mode estimates with a single base ਕੀਮਤ. ਵਿਸਤ੍ਰਿਤ mode uses grade ratios and grade ਇਕਾਈ prices to show ਕੋਕੂਨ ਵਿਕਰੀ differences.

ਕੋਕੂਨ ਵਿਕਰੀ ਅਤੇ ਰੇਸ਼ਮ ਤਬਦੀਲੀ ਵਿੱਚੋਂ ਕਿਵੇਂ ਚੁਣਾਂ?

ਤੁਲਨਾ selling cocoons as they are versus sending them to ਰੀਲਿੰਗ. It is useful when you want to decide the better ਰਸਤਾ quickly on site.

ਕੀ ਮੌਤ ਦਰ ਸਿੱਧੇ ਤੌਰ 'ਤੇ ਆਮਦਨ ਘਟਾਉਂਦੀ ਹੈ?

Not directly. The ਟੂਲ compares the ideal value derived from survival rate with the actual ਨਤੀਜਾ, so you can see the room for improvement.

ਕਿਹੜੀਆਂ ਇਕਾਈਆਂ ਦਾ ਸਹਿਯੋਗ ਹੈ?

ਭਾਰ supports kg / g / lb / t, ਸਮਾਂ supports ਘੰਟਾ / ਮਿੰਟ / ਦਿਨ, and pricing supports per kg / per lb / per t.

Is anything sent outside the ਬ੍ਰਾਊਜ਼ਰ?

No. By default, everything stays inside this ਬ੍ਰਾਊਜ਼ਰ for ਸੇਵ and restore.

ਕੀ ਤੁਸੀਂ ਬਹੁਭਾਸ਼ਾਈ ਵਰਤੋਂ ਦਾ ਸਮਰਥਨ ਕਰਦੇ ਹੋ?

Yes. It supports multiple languages, kg/lb/t, ਘੰਟਾ/ਮਿੰਟ/ਦਿਨ, and ISO 4217 ਮੁਦਰਾ codes.

ਨੋਟਸ

  • This ਟੂਲ is for estimating the direction of profitability. It may not match accounting ਮੁਨਾਫ਼ਾ.
  • ਪੱਤਾ ਲਾਗਤ, seed ਲਾਗਤ, ਮਜ਼ਦੂਰੀ rate, and ਰੀਲਿੰਗ ਲਾਗਤ vary widely by site, so always adjust them to your own conditions.
  • ਮੌਤ ਦਰ rate is not a disease diagnosis. Use it to ਤੁਲਨਾ numbers and find room for improvement.
  • When comparing ਕੋਕੂਨ ਵਿਕਰੀ with silk conversion, do not forget to include ਰੀਲਿੰਗ ਪ੍ਰੋਸੈਸਿੰਗ ਲਾਗਤ.