बाजारानुसार वर्गीकृत करा
See retail, business, and charcoal fits side by side before you pack or ship the lot.
इंधनलाकडाचा लॉट कोणत्या विक्री श्रेणीत येतो ते पाहण्यासाठी लांबी, जाडी, तुकडे स्थिती, आणि आर्द्रता भरा.
हा तपासक किरकोळ, व्यावसायिक, आणि कोळसा श्रेण्या एकाच स्क्रीनवर तुलना करतो, आणि तो फक्त ब्राउझरमध्ये मेट्रिक किंवा इम्पीरियल इनपुटसह काम करतो.
किरकोळ, व्यावसायिक, आणि कोळसा एकाच दृश्यात
मेट्रिक आणि इम्पीरियल इनपुट्स
ओलसर आणि कोरडा आधार आर्द्रता
URL शेअरिंग आणि स्थानिक मसुदे
सर्व गणना या ब्राउझरमध्येच राहतात आणि सर्व्हरवर पाठवल्या जात नाहीत.
See retail, business, and charcoal fits side by side before you pack or ship the lot.
Type cm, mm, m, in, or ft. Bare numbers follow the selected preset.
Wet-basis values are compared directly, and dry-basis values are converted automatically.
Copy a URL or keep a draft on this device for the next field visit.
या मर्यादा अंगभूत प्रारंभिक श्रेण्या आहेत. थेट तपासक प्रत्येक लॉटचा प्रत्यक्ष निकाल दाखवतो.
| श्रेणी | लांबी | जाडी | तुकडे | आर्द्रता | वापर |
|---|---|---|---|---|---|
| किरकोळ प्रीमियम | 25-33 cm | 5-9 cm | Standard or finer | 20% wb max | Shelf-ready retail packs and premium firewood |
| किरकोळ मानक | 20-40 cm | 4-12 cm | Rough or finer | 25% wb max | General retail packs and mixed lots |
| व्यावसायिक प्रीमियम | 30-50 cm | 6-15 cm | Rough or finer | 20% wb max | Premium wholesale lots and regular business orders |
| व्यावसायिक मानक | 25-60 cm | 5-18 cm | Round or finer | 30% wb max | Bulk business supply and recurring wholesale orders |
| कोळसा कच्चा माल | 30-120 cm | 8-25 cm | Round or finer | 30% wb max | Longer, thicker lots for charcoal use |
| सुकवणे आवश्यक | Same as the target band | Same as the target band | Same as the target band | Above the band limit, up to 70% wb | Seasoning queue before final sorting |
| पुन्हा प्रक्रिया आवश्यक | Outside the band | Outside the band | Split condition too weak | Above 70% wb or outside the band | Resplit, recut, or sort again |
The market you want to see first. Secondary fits stay visible below it.
The lot's current split pattern, such as round, rough, standard, or fine.
Moisture measured against the total current weight of the lot.
Moisture measured against the dry weight of the material.
Any band other than the primary band that still passes the lot.
cm = in × 2.54
MCwb = 100 × MCdb ÷ (100 + MCdb)
Pass = length ∧ thickness ∧ split ∧ moisture
Primary = first passing band in the selected focus order
Margin = smallest distance to any band boundary
Because the bands are overlapping by design. The primary band follows your market focus, and secondary fits remain visible.
Wet basis is compared directly. If you only know dry basis, switch the basis and the tool converts it for you.
Yes. You can type imperial units directly, and bare numbers follow the imperial preset when it is selected.
If the size and split fit but moisture is above the band limit, the checker shows Drying required and points to the best target band.
No. They are starter bands. Use them as a practical sorting rule and adjust them to your local market if needed.